Original OEM Electric Ride Protection Foot Pedal Side Step Running Boards for MPV Ford Transit Tourneo Custom LED Steel Material
- Category: >>>
- Supplier: Sichuan Tuole Auto Parts Co. Ltd.
Share on (1601198482074):
Product Overview
Description
Product Details
↑Cockpit wiring， improve stability↑
The installation of cockpit wiring is quick and convenient. The controller has good stability and faults are easy to troubleshoot.The wiring in the engine compartment is humid, with temperature differences and dust, which is a severe test for electronic components and is the fundamental reason for the instability of many controllers.
Detailed description of the basic functions of the electric pedal
①Pedal development:If one or two doors on one side of the vehicle are open, the pedal on that side will remain open, the pedalson that side will remain open until both doors are closed.
②Pedal retraction:lf both doors on one side of the vehicle are closed, the pedal on that side will remain retracted until one orboth doors are opened.
③Anti-pinch protection:When the anti-pinch decision is triggered the action, the current action will pause and pedal will expanduntil the new state changes, the pedal will execute the relative command.
④Ride protection function:When the car speed reaches more 5km/h, the driving protection is triggered, the pedal retracts automatically and does not open with the door status, recover until the speed drops below 5km/h.
⑤Sleep wake strategy:The status of the left front door, left rear door, right front door, and right rear door does not change within 30seconds, and the ECU enters low power mode. The status of the left front door, left rear door, right front door,and right rear door status changes, the Ecu exits the low power mode. The static operating current of the ECU is30mA and less than 2mA after hibernation.
⑤Sleep wake strategy:The status of the left front door, left rear door, right front door, and right rear door does not change within 30seconds, and the ECU enters low power mode. The status of the left front door, left rear door, right front door,and right rear door status changes, the Ecu exits the low power mode. The static operating current of the ECU is30mA and less than 2mA after hibernation.
↑Controller /ECU with Al real person voice prompts↑
The built-in chip with speaker monitors the pedal inreal-time through chips, current monitoring, Al calculation, and provides corresponding prompt feedback:status alerts,faultalerts,speed monitoringhazard warnings,and maintenance and repair.
①Real time reminder of pedal deployment and retraction status to increase driving safety;
②Functional setting feedback is more in line with ergonomicdesign;
③Fault prompt and detection to improve maintenanceiudgment efficiency;
④Reminder of dangerous driving status, based on chiplogic monitoring, providing promptwarnings for doors notclosed in forward and parking gears;
⑤Maintenance and repair tips,based on the number of timeselectric pedals are used formaintenance tips.
⑥The Al real person voice prompts function can be turned offthrough the app.
⑥The Al real person voice prompts function can be turned offthrough the app.
⑦If the electric pedal operates in a hostile environment, the pedal can be locked via the app to protect it.
⑧The color and mode of the light can be adjusted through the application that controls the electric pedal.
⑨Controller is installed in the cockpit design,with small temperature difference,less dust，suitable high & low temperature ,humidity and stable operation.
⑨Controller is installed in the cockpit design,with small temperature difference,less dust，suitable high & low temperature ,humidity and stable operation.
↑Aluminum alloy die-casting movable bracket↑
When others use carbon steel welded brackets to reduce costs, we insist on using aluminum alloy die-casting movable brackets, aluminum alloy CNC precision machining, mold die-casting molding, light weight, high precision, surface treatment through phosphating, vibration, powder spraying, electrophoresis and other processes, strong corrosion resistance tolerance coefficient in the micrometer level.
Most of the carbon steel welded brackets are manually bent using iron plates, which cannot guarantee the accuracy of the movement. Electrophoresis without any process treatment on the surface is prone to rusting, corrosion, and abnormal noise. The strength is too high, which can easily deform and cause secondary damage to the vehicle when encountering impacts and scratches.
↑Detachable integrated bracket↑
The car code brackets and aluminum alloy die-casting movable brackets are screwed in place and are removable for easy post-maintenance and versatility of the aluminum brackets. Obviously, welded brackets are not removable and are not universal.
↑Design of anti-dust cover for Brasket↑
When others think electric step pedal abnormal noise is unavoidable , we take the lead to using anti-dust cover as the standard configuration. The design of anti-dust cover is effectively preventing sediment and water stains. It also prevents the pedal movement mechanism from generating abnormal noise and undesirable operation during the stretching process.
In order to reduce costs， no dust cover is used, The exposed shaft sleeve can easily invade bracket assembly due to long-term use of sediment, which poses a great challenge to the usage environment of the pedal bracket, This is also the main reason abnormal pedal noise and bracket deformation.
↑Saint Gobain Shaft Sleeve↑
When others use carbon steel copper plated shaft sleeves, we have already used the Saint Gobain shaft sleeves that are commonly used by Land Rover electricpedals.Adopting the unique process of Saint Gobain in France, the aluminum alloy substrate is supplemented by a 304 stainless steel mesh structure, with up to five layers of sintering treatment. The inner surface is composite with wear-resistant material PTFE (polytetrafluoroethylene), forming a unique uneven structure with the advantages of self draining, self lubrication, wear resistance,and high strength. it fully combines the sewage function of nylon shaft sleeves with wear resistance and high strength of copper plated shaft sleeves.
Nylon Bearing sleeve has poor wear resistance and is subject to thermal expansion due to environmental impact . It is easy to wear,and the accuracy decline is easy to cause the bracket to become loose.The use environment of copper platedbearingsleeve is easy to rust,not discharge pollutants,and easy to accumulate dust and dirt,causing abnormal noise and increasing friction coefficient.
Product parameter
Load capacity： | 200KG MIN. |
Static current： | ≤ 2mA |
Running time： | 1.5~2s |
Running Noise： | Less than 60dB |
Storage Temperature： | -40°~+80 |
Rated current： | less than 5A |
Voltage range： | 9V-16V |
Motor torque： | more than 50N.m |
Operating Temperature： | -30°~+70 |
Package： | Carton Packaging |
Packaging size： | 110 * 30 * 42cm |
Part of our production plant
Cutting-edge hardware
Company BrandExhibition display and honours
Payment & Freight Logistics
FAQ
1.Q:Are you a factory or trading company?
A:We are a factory.
2.Q:Where is your factory located? How can I visit there?
A:Located in Chengdu Sichuan China. It will take one hour to Airport. Welcome all our clients.
3.Q:What about the hardware of your factory?
A: Our factory owns a full set of Machining equipment, include large CNC machning center,Sodic EDM machning, import EDM-HS,Radial drilling machines, Milling machines,Grinders,three-D inspection etc.
4.Q:How does your factory do regarding quality control?
A: We test product quality from the very beginning to the very end. All the moulds,the QC measure with three-D measuring equipments regularly.
5.Q:How is your development ability?
A:We develop no less than 200 new products every year.
6.Q:How is the installation match of your products?
A:All of our products are designed and produced according to the original car 3D datascanning, and fully match the installation.
7.Q:How do you make us competitive in the market?
A:We will continue to develop new products to ensure product quality, so that you have a long-term competitive advantage in the market.
A:We are a factory.
2.Q:Where is your factory located? How can I visit there?
A:Located in Chengdu Sichuan China. It will take one hour to Airport. Welcome all our clients.
3.Q:What about the hardware of your factory?
A: Our factory owns a full set of Machining equipment, include large CNC machning center,Sodic EDM machning, import EDM-HS,Radial drilling machines, Milling machines,Grinders,three-D inspection etc.
4.Q:How does your factory do regarding quality control?
A: We test product quality from the very beginning to the very end. All the moulds,the QC measure with three-D measuring equipments regularly.
5.Q:How is your development ability?
A:We develop no less than 200 new products every year.
6.Q:How is the installation match of your products?
A:All of our products are designed and produced according to the original car 3D datascanning, and fully match the installation.
7.Q:How do you make us competitive in the market?
A:We will continue to develop new products to ensure product quality, so that you have a long-term competitive advantage in the market.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
