Wholesale Low Carbon Steel Plate 1/1.5/3/2mm Thick Hot Cold Rolled Galvanized Black Carbon Steel Sheet
- Category: >>>
- Supplier: Shandong Jiate Steel Co. Ltd.
Share on (1601205334570):
Product Overview
Description
nm450 wear-resistant steel plate wear resistant plate nm500 10mm wear resistant carbon steel sheet steel plate
Carbon steel plate: Carbon steel is carbon steel with a carbon content of less than 0.8%. This steel contains less sulfur,phosphorus and non-metallic inclusions than carbon structural steel, and has better mechanical properties. Carbon steel can be divided into three categories according to the carbon content: low carbon steel (C≤0.25%), medium carbon steel(C is 0.25-0.6%) and high carbon steel (C>0.6%).
Product name | Carbon Steel Plate |
Standard | GB/T700 standard: Q235A, Q235B, Q235C, Q235D, Q235E EN10025 standard: S235JR, S235J0, S235J2 DIN17100 standard: St33, St37-2, Ust37-2, RSt37-2, St37-3 DIN17102 standard：StE255, WstE255, TstE255, EstE255 ASTM standard : A36/A36M A36 A283/A283M A283 Grade A, A283 Grade BA283 Grade C, A283 Grade D A573/A573M A573 Grade 58, Grade 65, Grade 70 |
Alloy Or Not | non-alloy |
Surface treament | mild steel; plain finish |
Technical Test | UT Test, Bending Test, Charpy Test |
Application Fields | Wear-resistant steel with high wear resistance and good impact performance, capable of cutting, bending, welding, etc., can betaken welding, plug welding, bolting and other ways to connect with other structures, with the province when in the course of the repair site, convenient, widely used in metallurgy, coal,cement, electricity, glass, mining, building materials, bricks and other industries, compared with other materials. |
Package | Export standard package: bundled wooden box or be required;The inner size of container is below: (1)20 foot GP: 5.8 m(length)x 2.13 m(width)x 2.18 m(high)about 24-26 CBM (2)40 foot GP: 11.8 m(length)x 2.13 m(width)x 2.72 m(high)about 68 CBM We will packing as the factory, and reach the stander of export. Or as the customer request. In addition,We will make the products with good surface protection. |
ALL SPECIFICATIONSCAN BE PROCESSED
Adequate stock, complete specifications .manufacturers owna number of processing equipment,according to customer needs tomap to sample,cutting andprocessing customized
BETTER MATERIALS AREMORE RELIABLE
Raw materials layer by layerscreening,smooth surface,deep thread,screw force uniform,quality assurance
WEAR AND PRESSURE RESISTANCE
Adopt new steel coil raw materials,strong bearing capacity,high hardness
Rebar is a small section steel, mainly used for the frame of reinforced concrete building components. Steel bars are usually used in reinforced concrete. The effect of the stripes is to increase friction, so that the steel and concrete bite together to form a whole. Under the action of external force, there will be no twitch phenomenon and improve the strength of concrete. Steel bars are widely used in civil engineering construction such as houses, Bridges and roads. From highways, railways, Bridges, culverts, tunnels, flood control, DAMS and other public facilities, to the foundation of residential buildings, beams, columns, walls, plates, rebar is an indispensable structural material.
Shandong Jiate Steel Co., Ltd. is an enterprise integrating steel production and processing. Founded in 2011, the company is located in Liaocheng City, Shandong Province, China. The company mainly produces: steel pipe, (seamless pipe, welded pipe) steel plate, steel bar, steel coil, steel strip, steel bar. We have: stainless steel/carbon steel/iron/copper/aluminum/alloy steel/galvanized/chrome and other materials, our products meet the production standards, we provide polishing/bending/cutting/transportation services. Support secondary processing, we have the most advanced equipment, support according to the drawing processing production. The company always takes customer satisfaction as the service goal and provides customers with a full range of services.
Our clients come from all over the world and have maintained long-term cooperation.We have worked with customers in more than 30 countries in Europe.Southeast Asia, Africa and Asia.
Customer Evaluation
The steel is of good quality and reliable. Through years of hard work, we have won the trust of customers with high quality,
convenient transportation and rich variety specifications.
convenient transportation and rich variety specifications.
All of our products have passed a number of quality certifications, and we have a strict quality control system. Manufacturer test certificates and third party inspections are available.
1.Packing form: cartons, wooden cases, can also be packed according to customer requirements.
2. Mode of transport: sea, air or land transport, of course, a small number of express can also be used.
Q1. Where is your factory?
A1: Our company's machining center is located in Liaocheng, Shandong, China. Fully equipped, laser cutting machine, mirror polishing machine and other equipment. We can provide a wide range of personalized services according to the needs of our customers.
Q2. What is your company's main product?
A2: Our main products are plates/sheets, coils, round/square tubes, bars, channels, etc. of copper, aluminum, stainless steel,etc.
Q3. How do you control the quality?
A3: Factory test certification is provided when leaving the factory, and third-party inspection is available.
Q4. What are the advantages of your company?
A4: We have many professional technicians, more competitive price and best after-sale service than other stainless steel
companies.
Q5. How many countries have you exported to?
A5: Mainly exported to more than 50 countries such as the United States, Russia, the United Kingdom, Kuwait, Egypt, Turkey,Jordan, India, etc.
Q6. When can I get your response after asking.
A6: Within 10 minutes of working hours and within 12 hours of non-working hours.
Q7. How can I get an accurate quote?
A7:Please provide the information of prodcuts standard, material, size and quantity.
Q2. What is your company's main product?
A2: Our main products are plates/sheets, coils, round/square tubes, bars, channels, etc. of copper, aluminum, stainless steel,etc.
Q3. How do you control the quality?
A3: Factory test certification is provided when leaving the factory, and third-party inspection is available.
Q4. What are the advantages of your company?
A4: We have many professional technicians, more competitive price and best after-sale service than other stainless steel
companies.
Q5. How many countries have you exported to?
A5: Mainly exported to more than 50 countries such as the United States, Russia, the United Kingdom, Kuwait, Egypt, Turkey,Jordan, India, etc.
Q6. When can I get your response after asking.
A6: Within 10 minutes of working hours and within 12 hours of non-working hours.
Q7. How can I get an accurate quote?
A7:Please provide the information of prodcuts standard, material, size and quantity.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
