Vertical Slurry Pump sand aggregate mud sludge mine tailings rubber chrome submersible SP SPR sump pump 200SV

Product Overview

Description

VS VSR Sump Pump Vertical slurry pump semi-submersible slurry sand pump

 

Introduction: 

Vertical Slurry Pump is a cantilever sump pump, which work submerged to transport high abrasive and high density slurries with large particles. It doesn't need any seal water. Hard metal lined or fully rubber lined fitted. High capacity double suction semi-open impeller design. Suction agitator is also available.

 

Overview:

Size (discharge): 40mm to 300mm
Capacity: 7.28-1300 m3/h
Head: 3m-45 m
Handing solids: 0-79mm
Concentration: 0%-70%

Pump casings, Impeller, liner, throatbush: high-chrome alloy, Rubber, Polyurethane, Stainless steel, etc

 

Typical Application:

• Mineral processing	• Mining	• Coal Washery	• Cyclone feeds
• Aggregate	• Chemical slurry	• Tailing	• Mill grinding
• Ash handing	• Metallurgy	• Waste sludge	• Coarse sand
• Sand	• Phosphoric acid	• Dredging	• Sewage
• Quarry	• Power Plant	• Fertilizer	• Tunnel
• Iron ore sand	• Copper Concentration	• Gold mine	•Molybdenum
Bentonite	Construction	Island Reclaiming	Alumina Industry

 

Design Features:

1. Vertical,Submerged,Cantilevered shaft sump slurry pump

2. Bearing Assembly - The bearings, shaft and housing are generously proportioned to avoid problems associated with the operation of cantilevered shafts in the first critical speed zones.

3. Column Assembly - Completely fabricated from anti-wear carbon steel. The VSR model is rubber covered.

4. Shaft - Different length of the pump drive shaft or suction extension pipe could be selected

5. Casing - VS(R) has a simple bolt-on attachment to the base of the column. It is manufactured from a wear resistant alloy for the VS pump series and from moulded Rubber for the VSR pump series.

6. Impeller - Double suction semi-open impeller design, Wear resistant alloys, polyurethane and moulded elastomer impellers are interchangeable.

7. Upper Strainer - Drop-in metal mesh; snap-on elastomer or polyurethane for VS and VSR pumps. Strainers fit in column openings.

8. Lower Strainer - Bolted metal or polyurethane for VS pumps; moulded snap-on elastomer for VSR pumps.

9. Discharge Pipe - Metal for VS pumps; Rubber covered for VSR pumps. All wet metal parts are completely rust protected.

10. Agitator option keeps solids in suspension,Alternatively, a mechanical agitator is fitted to an extended shaft protruding from the impeller eye.

11. Don’t need any seal and seal water.

 

VerticalSlurry Pumps Performance Parameters

 

VS & VSR Parameters:

Note:

1. “M” means high chrome alloy;     “RU” means rubber(polymer)

2. Flow Rate range recommended : 50%Q≤Q≤110%Q

 

Outline Dimensions

Please contact us for the detailed outline drawings if needed.

 

Wear Parts 

 

Motor Drive Type:

 

Assembly Workshop

 

Packaging & Shipping:

 

Applications Case:

Main products:

Note: The displayed prices are for reference only, and the final price should be subject to mutual negotiation.

 

Welcome to contact us any time for more details.
Your inquiry or advice will get our prompt attention and response !