3102 H24 Blue Hydrophilic Aluminium Foil for Air Conditioner Evaporator Condenser Coil
- Category: >>>
- Supplier: Shandong Wanteng Steel Co. Limited
Share on (1601239337910):
Product Overview
Description
Product Description
The Hydrophilic aluminum foil is a hydrophilic treatment of aluminum foil. Through a special process, a layer of hydrophilic water layer is coated on its surface. The condensed water will quickly disperse on the hydrophilic aluminum foil and will not condense into water droplets, increasing the heat exchange area, accelerating the cooling and heating speed, and effectively avoiding the noise caused by the obstruction of air flow by condensed water.
Specification
Product Name | Hydrophilic Aluminum Foil |
Alloy | 1100,1030B,3102,8011 |
Temper | O,H16,H18,H22,H24,H26 |
Thickness | 0.03-0.8mm |
Width | 50mm-1250mm |
I.D | 75mm,150mm,200mm,300mm,400mm,500mm |
O.D | 300mm-1200mm |
Coating thickness | 1-3 micron |
Color | Blue, Golden,Black,Green |
Neutral Salt Spray Test(NSS) | ASTM B117>500h=10 |
Hydrophilic aluminum foil is the main raw material for heat exchangers in household air conditioners, which has a significant impact on the efficiency of air conditioners. If the raw material of the heat exchanger is hydrophilic aluminum foil, it can increase the cooling efficiency by 5%, and also has anti-corrosion and mold resistant functions, without odor, without causing the accumulation of water droplets to block and affect heat exchange. The national standard for aluminum sheet and strip (GB/T3880-2006) is a unified standard applicable to aluminum alloy sheet and strip materials. Aluminum foil with a thickness of less than 0.2 millimeters is specified in the GB/T3880-2006 standard.
Product Features
1. Excellent hydrophilicity and corrosion resistance;
2. Good formability and non wear resistance to molds;
3. Extremely strong stamping oil resistance, solubility resistance, and heat resistance;
4. The airflow resistance is small, and the heat exchange rate can generally increase by 10% -15%.
Application
Hydrophilic foil is the main raw material for heat exchangers in air conditioners and is widely used in refrigeration equipment such as household air conditioners, refrigerators, and automotive air conditioners.
Compared with ordinary light foil, it has the following advantages:
1. It can increase its anti-corrosion, anti mold, and odorless properties;
2. The condensed water accumulated on the surface of the heat exchanger is evenly distributed on the surface, which will not cause aggregation and blockage between the heat exchangers due to the formation of water droplets, affecting the heat exchange conditions and thereby increasing the heat exchange rate by 5%;
3. Due to the lack of water droplets, the noise caused by vibration is also reduced accordingly;
4. It can prevent the oxidation powder of the air conditioner from blowing into the room and causing adverse effects on the human body, meeting environmental requirements;
5. The hydrophilic aluminum foil used for the cooling fins of air conditioners should comply with the regulations of YS/T95.2-2001.
2. The condensed water accumulated on the surface of the heat exchanger is evenly distributed on the surface, which will not cause aggregation and blockage between the heat exchangers due to the formation of water droplets, affecting the heat exchange conditions and thereby increasing the heat exchange rate by 5%;
3. Due to the lack of water droplets, the noise caused by vibration is also reduced accordingly;
4. It can prevent the oxidation powder of the air conditioner from blowing into the room and causing adverse effects on the human body, meeting environmental requirements;
5. The hydrophilic aluminum foil used for the cooling fins of air conditioners should comply with the regulations of YS/T95.2-2001.
Packing & Delivery
Company Profile
Shandong Wanteng Steel Co., Ltd is a comprehensive company, which is founded in 2015. Specialized in stainless steel products, seamless steel pipe, welded steel pipe,steel coil and plates. It is located in Liaocheng, the Steel base of China, which is known all over the world. It is very close to Xingang Seaport, where is much convenient in land carriage,carriage by sea and carriage by air.
Since our establishment, we have always adhered to the business policy of "Quality for Survival, Product for Development, Credibility for Cooperation and Service for Customer". Under the guidance of this business policy, our company acts as a perennial distributor of seamless steel pipes, stainless steel pipes and alloy pipes for Tianjin Seamless Steel Tube Plant, Chengdu Pangang Group, Baotou Steel Pipe Plant, Daye Steel Plant, Baoshan Steel Pipe Plant and other major steel plants. Stainless steel plate and coils for TISCO BAO STEELJISCOZPSS LISCO, etc. Modern large-scale outdoor storage and indoor storage have been set up in our company, and 20,000 tons of available goods have been prepared.
"Providing Quality Products, Excellent Service, Competitive Prices and Prompt Delivery" we are looking forward to even greater cooperation with overseas customers based on mutual benefits.
Please feel free to contact us for more information.
As a company with rich experience and mature development, we welcome customers to visit our office and factory at any time.
Our team
Our company's foreign trade team has teams in Tianjin and Shandong, China, and they are well developed. And our team is constantly expanding. In August 2021, the Jinan office has just been established. We plan to continue the team fission in Qingdao, Shandong, Shanghai and other places in two years to meet the growing business needs.
The company pays attention to the growth and development of every employee. We will regularly hold knowledge exchanges, including but not limited to business skills and product knowledge. We expect employees to continuously enhance their soft power and shine like the sun on the future career development path.
FAQ
Q: What is your terms of payment ?
A: Normally 30% TT in advance, balance paid before shipment. If you want other terms, please feel free to let us know in your inquiry.
Q: How long does it take for samples and mass production?
A: Usually it will take 15-20 days for new molds and free samples (within 5 kg) after confirmation, 25-30
days for mass production.
Q: OEM/ODM available?
A: Yes,we can!
Q: Could you provide sample?
A: Yes, We are honored to offer you samples for quality check.
Q: Is sample order accepted?
A: Yes,we accept sample order and we can provide design service!
Q:Can you offer certificate of origin?
A: Yes, we can offer CO, FTA, Form A, Form B, Form E etc based on your requirements.
Q:How can you guarantee the quality?
A: We have complete test systems from raw materials to finished products, each step must be checked and signed by our professional teams.
A: Normally 30% TT in advance, balance paid before shipment. If you want other terms, please feel free to let us know in your inquiry.
Q: How long does it take for samples and mass production?
A: Usually it will take 15-20 days for new molds and free samples (within 5 kg) after confirmation, 25-30
days for mass production.
Q: OEM/ODM available?
A: Yes,we can!
Q: Could you provide sample?
A: Yes, We are honored to offer you samples for quality check.
Q: Is sample order accepted?
A: Yes,we accept sample order and we can provide design service!
Q:Can you offer certificate of origin?
A: Yes, we can offer CO, FTA, Form A, Form B, Form E etc based on your requirements.
Q:How can you guarantee the quality?
A: We have complete test systems from raw materials to finished products, each step must be checked and signed by our professional teams.
We Recommend
Customized Aluminum Foil Chocolate Bar Wrapper
US $1.00-$6.50
Plastic yogurt cups with heat seal foil lids
US $0.002-$0.02
New Arrivals
New products from manufacturers at wholesale prices
