Factory Outlet Automatic Tyre Changers Machine With Helping Arm Tyre Changer Equipment For Workshop Use
- Category: >>>
- Supplier: Liaoning Jiean Auto Tech Co. Ltd.
Share on (1601245835161):
Product Overview
Description
Product Display
Applicable Rim | 13"-28" |
Max Tyre Diameter | 1120mm |
Max Tyre Width | 12" |
Working Pressure | 8-10bar |
Voltage | 380V/220V/110V |
Motor Power | 0.75KW/1.1KW |
Machine Dimensions | 1780×1300×1990mm |
Packing Dimensions | 1150X1800X1100mm |
Net weight/Gross weight | 370KG/426KG |
Lifting time | ≤30s |
Company Profile
FAQ
Q: What is the ceiling height reouired for a ja car lift?
A: The reouired ceiling height will vary depending on the lift model, as well as the intended vehicle. Please refer to the product specification page for each product for further details.
Q: Any suggestions for a first time installer?
A: Thoroughly read through the manual, familiarize yourself with the manual, and multiple read-throughs arehighlyi recommended. Do not skim through the pages, fully comprehending the installation steps will saveyou time in the long run.
Q: Oan a ja tire changer work with run-flat tires?
A: Although tire changers with power assist arms can handle some run-flats, you should consult run-flat tire manufacturers for further clarifications and operation reouirements.
Q: Do i need an air compressor to operate the machine?
A: Yes. 125-150 psi is reouired for our ranger tire changers. This requires the use of an air compressor.
Q: Why won't my wheel aligner read the targets?
A:Make sure no sunlight is hitting the cameras. Sunlight can also reflect off the floor and into the camerathese rays can interfere with the signal from the camera to the targets, if the problem persists, contact us.
A: The reouired ceiling height will vary depending on the lift model, as well as the intended vehicle. Please refer to the product specification page for each product for further details.
Q: Any suggestions for a first time installer?
A: Thoroughly read through the manual, familiarize yourself with the manual, and multiple read-throughs arehighlyi recommended. Do not skim through the pages, fully comprehending the installation steps will saveyou time in the long run.
Q: Oan a ja tire changer work with run-flat tires?
A: Although tire changers with power assist arms can handle some run-flats, you should consult run-flat tire manufacturers for further clarifications and operation reouirements.
Q: Do i need an air compressor to operate the machine?
A: Yes. 125-150 psi is reouired for our ranger tire changers. This requires the use of an air compressor.
Q: Why won't my wheel aligner read the targets?
A:Make sure no sunlight is hitting the cameras. Sunlight can also reflect off the floor and into the camerathese rays can interfere with the signal from the camera to the targets, if the problem persists, contact us.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
