fire extinguisher ball production line 1.2kg

Product feature:

1. 
   

   Use environmet: power outlet, power distribution cabinets, kitchens, warehouses, hotels, shopping malls, automobile, shipbuilding and other fire-prone areas.

   
   


2. 
   

   Place the automatic fire extinguishing ball about 30 cm above the fire hazards with bracket or hook, and follow the direction of arrow to face down. Kindly suggest placing two in the same location to achieve the better protection.

   
   


3. 
   

   If the fire occurs in an uninhabited environment, when the flame comes into contact with the fire extinguishing ball, the fire extinguishing ball will trigger the automatic fire extinguishing reaction mechanism to extinguish the fire source by extinguishing powder, so as to timely prevent the spread of the fire.

   
   


4. 
   

   When a fire is discovered, the fire extinguishing ball can be thrown to the fire source. Than fire extinguishing mechanism can be triggered. Put off the fire within 3-5 seconds, with an alarm of 120dB.

   
   


5. 
   

   After totally fire extinguished, clean the site with vacuum cleaner or other tools.

   
   

Matters need attention:

1. 
   

   The automatic fire extinguishing ball is used to extinguish fire only. Cannot be used for other purposes.

   
   


2. 
   

   The automatic fire extinguishing ball should be stored or hung under normal temperature and dry environment.

   
   


3. 
   

   Do not intentionally throw or ignite the automatic fire extinguishing ball.

   
   


4. Optional damage, dismantle, change the product is prohibited.

Installation instructions:

* : The hanging product can be suspended directly in the target position.

Method 1: Installation on the wall.

1. 
   

   Place the bracket to the intended installation place then make markings for the bracket holes on the surface. With a drill make holes on the markings same size as the screws anchors.

   
   


2. 
   

   After the expansion bolt is inserted into the hole, place the bracket in the installation position; Pass the screw through the mounting hole of the bracket and screw in the expansion bolt.

   
   


3. 
   

   Place the automatic fire extinguishing ball securely on the bracket with the arrow pointing down.

   
   

Method 2: Installation on a flat surface.

1. 
   

   Placing the bracket in the target location on the flat surface;

   
   


2. Place the automatic fire extinguishing ball securely on the bracket with the arrow pointing down.