FS B2 Type Cement Mortar Polymer Waterproof Powder for Exterior Plastering

Bignon FS-B2 type polymer waterproof mastic is made of a variety of polymer materials polymerisation, single-component, dry powder, with strong adhesion, good water retention, waterproofing, seepage resistance, ageing resistance, resistance to freezing and thawing, heat-resistant, freeze-thawing resistance, easy and fast construction, non-toxic, odourless, non-polluting, is a green environmentally friendly products. Can be customized according to customer requirements: waterproof, paste, hook joints, coloured (four-in-one) or separate bonded mastic.

1.  Superior high viscosity performance; bonding, waterproofing, hooking integration. 

2.  anti-cracking, anti-freeze-thaw, anti-aging, no hollow drum, can form a solid and full of bonding layer. 

3.  non-toxic, odourless, non-polluting, green.

4.  Low project cost, easy and fast construction, short construction period.

1. building internal and external walls; bonding, waterproofing, waterproofing of ceramic tiles, floor tiles, panels, finishing
materials, bonding and hooking. 

2. the bonding of decorative panels, thermal insulation wall paste waterproof.

3. basement,kitchen, bathroom, pool and other projects paste waterproof. 

4. concrete buildings; water conservancy, bridges, civil pools,cesspools, attempts and other engineering bonding waterproofing.

1. waterproof layer: the base surface requires smooth and dense, no sand, oil, sprinkle water to moisten the base surface, with water mixed with water, according to the design of the thickness of the scraping, scraping should be full of scraping, compaction,a work, scraping direction should be with the interface layer at an angle of 90 degrees to each other.

2.  paste the process of decorative tiles at the same time to complete the waterproof layer of the operation. Because of the superior seepage resistance and high viscosity of the cement, there are waterproof requirements to do the part of the decorative brick, such as toilets, external walls, etc.. Can not do another waterproof layer, with Yicai mud full scraping of its base layer (about 1 ~ 2mm) for the waterproof layer closed, and then use Yicai mud as a binder to paste the decorative tiles and hook joints,the whole process of operation at the same time to complete the waterproofing layer and paste bricks and hook joints in the construction.

3. maintenance: waterproof layer, bonding layer after the final coagulation (8-12 hours), at the same time sprinkler maintenance, maintenance can be sprayed or moisturising maintenance method, depending on the temperature several times a day maintenance, maintenance period of not less than 7 days.

4. such as the need to do water storage test, should be carried out after 7 days of construction of waterproof layer.

1.  Products double plastic woven bag packaging, special requirements in the order when proposed.

2.  The product should be stored in a
cool and dry place, pay attention to moisture-proof

3.  Packing: 25kg, 50kg(±0.25kg).

4.  Shelf life is six months. 

Note: We can produce white or colourful products according to customers' requirements.