PCI E 4.0 4X to X4 Extender Riser Card Extension Cable 90D90D 0.1M 0.15M 0.2M 0.3M 0.4M 0.5M 0.6M 0.7M 0.8M 0.9M 1M 1.1M 1.2M
- Category: >>>
- Supplier: Shenzhen Bojiada Technology Co. Ltd
Share on (1601276319084):
Product Overview
Description
Related Products
PCI-E 4.0 4X to X4 Extender Riser Card Extension Cable 90D90D 0.1M 0.15M 0.2M 0.3M 0.4M 0.5M 0.6M 0.7M 0.8M 0.9M 1M 1.1M 1.2M | ||||||||
Product Description
Specification
Product name: PCIE 4.0 x4 to x4 extension cable
Product model:
PCI-E 4.0 4X 180D180D
PCI-E 4.0 4X 180D90D
PCI-E 4.0 4X 90D180D
PCI-E 4.0 4X 180D180D
PCI-E 4.0 4X 180D90D
PCI-E 4.0 4X 90D180D
PCI-E 4.0 4X 90D90D
Transfer speed: PCIE 4.0 x4 full speed
Cable length: 0.1M~ 1.2M, the length can be customized
Applicable matching cards: wireless network card, wired network card, capture card, USB card, solid state hard disk card, as long as the PCIe card is x4 and the motherboard slot is x4 interface can support.
Cable length Description:
The length of the wire in our shop refers to the part of the visible wire, excluding the PCB and the connector, if it contains the PCB and the connector, add about 3cm. The total length is about 8cm, please refer to the 5cm dimension in the figure below.
Cable length: 0.1M~ 1.2M, the length can be customized
Applicable matching cards: wireless network card, wired network card, capture card, USB card, solid state hard disk card, as long as the PCIe card is x4 and the motherboard slot is x4 interface can support.
Cable length Description:
The length of the wire in our shop refers to the part of the visible wire, excluding the PCB and the connector, if it contains the PCB and the connector, add about 3cm. The total length is about 8cm, please refer to the 5cm dimension in the figure below.
1. What is the quality of the wire? Is there a shield?
There is metal shielding, advanced EMI shielding conductive polymer, new materials for EMI shielding, flat cable design. This technology allows each cable to be completely covered by the electromagnetic interference shielding of conductive polymer to prevent the incidence or emission of electromagnetic frequencies, minimize interference and performance degradation, and reduce the weight of the cable.
There is metal shielding, advanced EMI shielding conductive polymer, new materials for EMI shielding, flat cable design. This technology allows each cable to be completely covered by the electromagnetic interference shielding of conductive polymer to prevent the incidence or emission of electromagnetic frequencies, minimize interference and performance degradation, and reduce the weight of the cable.
2. Is the wire soft? Can it be bent?
The cable is the fourth-generation PCIe dedicated cable . The black cable has a thickness of 1.3mm. The cable can be bent or folded without affecting the use.
3. Why is the performance poor after connecting the extension cord? Or is it stuck slowly or not working?
When the graphics card extension cable is connected, the performance is insufficient or the function is abnormal. There are three common problems:
1. The extension cable is assembled incorrectly. The graphics card extension cable should be installed in the graphics card slot closest to the CPU. Other slots have poor performance.
2. The golden fingers of the graphics card or the motherboard socket terminals are not in good contact or have oxides, causing the card to slow down, and the golden finger contact points should be clean.
3. The motherboard is aging, the graphics card is aging, and the equipment is more than 4 years old and does not support the use of extension cords. Please use at a lower speed if the equipment is aging or the signal is poor
4. Product advantages:
1. Cable advantage, the fourth-generation shielded high-speed cable , using high-quality connectors, high-frequency support PCIe 4.0 x4 Gen4 stable transmission
2. Cable length advantage, from 5cm to 120cm can be customized, the adapter sold in our shop, the cable impedance is low, the cable length within 60cm can stably support PCIe4.0 full speed.
3. The differential signal has no via hole design, there is no signal attenuation interference problem of parasitic capacitance and parasitic inductance, and there is no CAF micro short circuit phenomenon, and the product is durable.
4. The PCB uses high-quality materials with high frequency and low resistance. The PCB is made of high-quality materials. The PCB uses high TG plates. The thickness of the copper material is thickened to 1oz. The gold finger has sufficient gold plating content. The crash of the sound problem.
5. The wire used in the product is very durable. Use PCB gaskets with a thickness of 3mm to protect the metal welding points, and lock the screws and hexagonal nuts to fasten. The product is strong and reliable, resistant to pulling, anti-interference, and will not break The nail drop problem.
6. The PCB is short and fat design, which will not get stuck to the graphics card. The fat and long design makes the board easier to install and reduces the chance of damage
The cable is the fourth-generation PCIe dedicated cable . The black cable has a thickness of 1.3mm. The cable can be bent or folded without affecting the use.
3. Why is the performance poor after connecting the extension cord? Or is it stuck slowly or not working?
When the graphics card extension cable is connected, the performance is insufficient or the function is abnormal. There are three common problems:
1. The extension cable is assembled incorrectly. The graphics card extension cable should be installed in the graphics card slot closest to the CPU. Other slots have poor performance.
2. The golden fingers of the graphics card or the motherboard socket terminals are not in good contact or have oxides, causing the card to slow down, and the golden finger contact points should be clean.
3. The motherboard is aging, the graphics card is aging, and the equipment is more than 4 years old and does not support the use of extension cords. Please use at a lower speed if the equipment is aging or the signal is poor
4. Product advantages:
1. Cable advantage, the fourth-generation shielded high-speed cable , using high-quality connectors, high-frequency support PCIe 4.0 x4 Gen4 stable transmission
2. Cable length advantage, from 5cm to 120cm can be customized, the adapter sold in our shop, the cable impedance is low, the cable length within 60cm can stably support PCIe4.0 full speed.
3. The differential signal has no via hole design, there is no signal attenuation interference problem of parasitic capacitance and parasitic inductance, and there is no CAF micro short circuit phenomenon, and the product is durable.
4. The PCB uses high-quality materials with high frequency and low resistance. The PCB is made of high-quality materials. The PCB uses high TG plates. The thickness of the copper material is thickened to 1oz. The gold finger has sufficient gold plating content. The crash of the sound problem.
5. The wire used in the product is very durable. Use PCB gaskets with a thickness of 3mm to protect the metal welding points, and lock the screws and hexagonal nuts to fasten. The product is strong and reliable, resistant to pulling, anti-interference, and will not break The nail drop problem.
6. The PCB is short and fat design, which will not get stuck to the graphics card. The fat and long design makes the board easier to install and reduces the chance of damage
Package:
1 x PCI-E 4.0 X4 Extension Cable
Details Images
Company Introduction
Shenzhen Bojiada Technology Co., Ltd is a comprehensive enterprise that dedicated in Consumer Electronics and Computer Accessories & Peripheral; it combines R&D ,production ,marketing and service together .
Own CE , FCC, RoSH certification , OEM&ODM service are offered
The company’s products include 5G 4G Modem / Wifi BT Adapter Card, PCI-E 5.0 4.0 3.0 16X 8X 4X 1X Riser Card Extension Cable, Computer Power Supply, USB / SATA PCI-E Expansion Riser Card, SSD Adapter Card , Mini SAS Cable, Other Computer Cables, and Other Computer Accessories etc. Its self-owned brand BJD is now popularly welcome and recognized by customers .
Establish in September 2008 , Shenzhen Bojiada Technology Co., Ltd has 2500 square meters manufacturing workshops, nearly 200 employees and more than 5 standard production lines at a monthly capacity of 600000 unites. An new Industry part is under construction ,The local employees number will increase to 300 .
Business Policy: "High Quality ,High Efficiency, Best Service, Keeping Innovation "
Own CE , FCC, RoSH certification , OEM&ODM service are offered
The company’s products include 5G 4G Modem / Wifi BT Adapter Card, PCI-E 5.0 4.0 3.0 16X 8X 4X 1X Riser Card Extension Cable, Computer Power Supply, USB / SATA PCI-E Expansion Riser Card, SSD Adapter Card , Mini SAS Cable, Other Computer Cables, and Other Computer Accessories etc. Its self-owned brand BJD is now popularly welcome and recognized by customers .
Establish in September 2008 , Shenzhen Bojiada Technology Co., Ltd has 2500 square meters manufacturing workshops, nearly 200 employees and more than 5 standard production lines at a monthly capacity of 600000 unites. An new Industry part is under construction ,The local employees number will increase to 300 .
Business Policy: "High Quality ,High Efficiency, Best Service, Keeping Innovation "
Factory Workshop
Packing&Shipping
FAQ
Are you factory?
Yes. We are a professional manufacturer of computer accessories for 10 years.There are more 200 production workers, 10 R&D engineers and 30 quality inspection technicians in our factory.
What is its lead time for samples and mass production?
Within 3 work days for samples and 10 days for mass production.
How to proceed an order for our products?
Firstly let us know your demands or requirements.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the order and pay for the formal order.
Fourthly We arrange the production.
Can you produce goods as customer design?
Welcome to send your design or sample to us , ODM&OEM service are offered friendly.
What is your payment terms?
We accept most of the payment methods, but mainly accept Bank Transfer(T/T), Alibaba Payment via Credit Card and Western Union.
What about the quality?
All items will be strict inspection before leave the factory. Kindly please check items once you received parcel. We will help you solve it if find out any quality problem.
If more information you want to know, please feel free to contact us! Thank you!!!
Yes. We are a professional manufacturer of computer accessories for 10 years.There are more 200 production workers, 10 R&D engineers and 30 quality inspection technicians in our factory.
What is its lead time for samples and mass production?
Within 3 work days for samples and 10 days for mass production.
How to proceed an order for our products?
Firstly let us know your demands or requirements.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the order and pay for the formal order.
Fourthly We arrange the production.
Can you produce goods as customer design?
Welcome to send your design or sample to us , ODM&OEM service are offered friendly.
What is your payment terms?
We accept most of the payment methods, but mainly accept Bank Transfer(T/T), Alibaba Payment via Credit Card and Western Union.
What about the quality?
All items will be strict inspection before leave the factory. Kindly please check items once you received parcel. We will help you solve it if find out any quality problem.
If more information you want to know, please feel free to contact us! Thank you!!!
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
