factory supply cheap 40 100 mesh quartz sand silica sand with high purity 99% 90% and high withness SIO2 sand
- Category: >>>
- Supplier: Xiamen Daxing Industry Co. Ltd.Xiamen Ltd.
Share on (1601293269312):
Product Overview
Description
Products Description
Quartz sand is also used to prepare a surface before primarization, by a mechanical process that exploits the highly abrasive capacity of the compound. During sandblasting, the individual grain of sand is projected at high speed onto the surface to be cleaned, loosening the layer to be removed and pulverising it.
Pure Quartz Sand is regarded as a fantastic abrasive due to its hardness (it is harder than most natural minerals) and resistance to corrosion. Additionally, it is utilized as glass grinding media, scouring cleaners (powder), sanding and sawing grit
Sand blasting, scouring cleaners, grinding media, and grit for sanding and sawing all make use of quartz sands and finely ground silica sand. Quartz Silica sand is regarded as a fantastic abrasive due to its hardness and resistance to corrosion. Additionally, it is utilized as glass grinding media, scouring cleaners (powder), sanding and sawing grit, and sand blasting media. Crystals of quartz are more durable than glass. On the Mohs scale, In Glass is at around 5.5. On the Mohs scale, quartz crystals have a rating of 7.
Crystal quartz sand | d-D mm | Typical applications |
G12T | 0,1 - 0,4 | Aluminium, leather dye-house, ground glass production |
S 0,2-0,5T | 0,2 - 0,5 | Dental laboratories, woodworking, shoe-industry, marble, sculptures treatment |
S30T | 0,2 - 0,8 | Dental laboratories, woodworking, shoe-industry, marble, sculptures treatment |
S40T | 0,4 - 1,4 | Container, light and medium-sized plates, bridges, granite, vessel constructions, ships, pipes, metal constructions, light castings, derusting, facade cleaning, restoration of buildings |
S 0,7-1,2T | 0,7 - 1,2 | Container, light and medium-sized plates, bridges, granite, vessel constructions, ships, pipes, metal constructions, light castings, derusting, facade cleaning, restoration of buildings |
S1-2T | 1,0 - 2,0 | Vessel construction, medium-sized and heavy plates and castings, machine parts and equipments, heavy sheet metals |
S50T | 1,0 - 3,0 | Heavy sheet metals, vessel construction, heavy castings and machine parts |
DX BLAST Co., Ltd. (JX Blasting), with 30 years development, is a professional manufacturer of shot blasting machines and shot peening machines.
DX BLAST, distribution network consists of sales agents from many countries as Poland. Mexico. UAE. Saudi Arabia. Malaysia, Vietnam. Philippines, Pakistan, Indonesia
DX BLAST, distribution network consists of sales agents from many countries as Poland. Mexico. UAE. Saudi Arabia. Malaysia, Vietnam. Philippines, Pakistan, Indonesia
COOPERATE WITH THE BRANDS
CERTIFICATE
Intelligent designs ,innovative details and particularly durable components --- that is what our shot blasting equipment stands for .
There are our customers from all over the world to visit us and consult surface treatment issues .
DX BLAST , attend the professional event & show of surface treatment as : Gifa Düsseldorf in Germany , Tube Arabia , Steel FAB in UAE , Saudi Build , Metal Expo in Moscow, Metal& steel in Saudi , Metalex , MTA HANOI in Vietnam , Fundiexpo in Mexico , Inometal in indonesia , PDMEX in Philippine .....
To better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.
1. Small spare parts put in plywood wooden cases
2. Other parts is our company standard or according to customer requirements
3. Shipping: Container transport
2. Other parts is our company standard or according to customer requirements
3. Shipping: Container transport
FAQ
Q1. For this particular job, will abrasive blasting be used for surface preparation or as a cleaning procedure?
Q4. If blasting for surface preparation, what surface profile is required?
All coatings have a recommended surface profile (roughness) specification. Excess surface profile can shorten the life of a thin-film, low-build coatings, insufficient profile can cause delamination of high-build coatings.
Q5. Will coating adhesion be affected by surface contamination?
Some abrasives leaving a cleaner surface than others, which can have a substantial impact on coating adhesion.
The difference between these two procedures are as follows:
* When abrasive blasting is used as a surface preparation technique, the intention is to remove all surface contaminants and also prepare the substrate to receive a coating.
* When abrasive blasting is to be used as a cleaning procedure, then the intention is to remove the surface contaminants, while leaving the substrate untouched.
Q2. Will it be possible to reclaim and recycle the abrasive, or will it have a single use only?
The major deciding factor here is cost. The cost of abrasives, while very effective, are uneconomical to use if recycling is not an option.
Q3. Will the worksite be dust sensitive?
The amount of dust generated by different abrasives varies widely. Some excellent types of abrasives are available that are specifically graded to reduce dust.
* When abrasive blasting is used as a surface preparation technique, the intention is to remove all surface contaminants and also prepare the substrate to receive a coating.
* When abrasive blasting is to be used as a cleaning procedure, then the intention is to remove the surface contaminants, while leaving the substrate untouched.
Q2. Will it be possible to reclaim and recycle the abrasive, or will it have a single use only?
The major deciding factor here is cost. The cost of abrasives, while very effective, are uneconomical to use if recycling is not an option.
Q3. Will the worksite be dust sensitive?
The amount of dust generated by different abrasives varies widely. Some excellent types of abrasives are available that are specifically graded to reduce dust.
Q4. If blasting for surface preparation, what surface profile is required?
All coatings have a recommended surface profile (roughness) specification. Excess surface profile can shorten the life of a thin-film, low-build coatings, insufficient profile can cause delamination of high-build coatings.
Q5. Will coating adhesion be affected by surface contamination?
Some abrasives leaving a cleaner surface than others, which can have a substantial impact on coating adhesion.
Q6. Which abrasive provides the maximum productivity?
Abrasive particle size and shape all have an effect on blasting speed. Some factors to consider:
* The ideal abrasive size is where the largest particle is equal to the size of the thickness of the coating to be removed. If the particle size is too large, the “hit rate” is reduced because the grain count in the pot is lowered. If the particle size is too small, the speed of cutting through the old surface is reduced.
* Grain toughness is a term given to describe it’s durability and recyclability. A tougher grain converts more energy into the removal of the old coating, while a weaker grain is more likely to disintegrate on impact.
* Particle shape can either be rounded or angular. The more rounded the particle is, the more contact area it has, which increases the surface removal speed.
* The ideal abrasive size is where the largest particle is equal to the size of the thickness of the coating to be removed. If the particle size is too large, the “hit rate” is reduced because the grain count in the pot is lowered. If the particle size is too small, the speed of cutting through the old surface is reduced.
* Grain toughness is a term given to describe it’s durability and recyclability. A tougher grain converts more energy into the removal of the old coating, while a weaker grain is more likely to disintegrate on impact.
* Particle shape can either be rounded or angular. The more rounded the particle is, the more contact area it has, which increases the surface removal speed.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
