40/60 Crushed Abrasive Sanding Blasting Polishing Grit Granule Granis Sand Walnut Shell for Sandblasting
- Category: >>>
- Supplier: Xiamen Daxing Industry Co. Ltd.Xiamen Ltd.
Share on (1601293910851):
Product Overview
Description
Products Description
Walnut Shell for Blasting offer a softer, gentler media blasting alternative to harsher materials. Specifically intended for use in dry air blasting applications, walnut shells are a lightweight, angular media that will effectively remove topcoats while leaving undercoating intact. This walnut shell blasting media is excellent for rust-free paint removal from sheet metal and cleaning engines and transmissions. Walnut media blasting is especially useful when you want to clean paint, grease, and other dirt from the material’s surface but maintain the substrate materials’ integrity. Ideal for use with aluminum, brass, and sheet metal.
Walnut Shell for Blasting Applications Include:
* Stripping and cleaning of castings and moldings
* Deburring plastics and die castings
* Cleaning of metallic surfaces on automobiles, boats, bridges, and buildings
* Cleanout of aircraft engines and steam turbines
* Enhancing the porosity of grinding wheel and ceramics in burn-out applications
* Deflashing electronic components
* Deburring plastics and die castings
* Cleaning of metallic surfaces on automobiles, boats, bridges, and buildings
* Cleanout of aircraft engines and steam turbines
* Enhancing the porosity of grinding wheel and ceramics in burn-out applications
* Deflashing electronic components
Typical Properties of Walnut Shell for Blasting | ||
Specific Gravity | 1.2 to 1.4 | |
Bulk Density (lbs per ft3) | 40 – 50 | |
Free Moisture (80ºC for 15 hrs) | 3 – 9% | |
pH (in water) | 4 – 6 | |
Flash Point (closed cup) | 380º | |
DX BLAST Co., Ltd. (JX Blasting), with 30 years development, is a professional manufacturer of shot blasting machines and shot peening machines.
DX BLAST, distribution network consists of sales agents from many countries as Poland. Mexico. UAE. Saudi Arabia. Malaysia, Vietnam. Philippines, Pakistan, Indonesia
DX BLAST, distribution network consists of sales agents from many countries as Poland. Mexico. UAE. Saudi Arabia. Malaysia, Vietnam. Philippines, Pakistan, Indonesia
COOPERATE WITH THE BRANDS
CERTIFICATE
Intelligent designs ,innovative details and particularly durable components --- that is what our shot blasting equipment stands for .
There are our customers from all over the world to visit us and consult surface treatment issues .
DX BLAST , attend the professional event & show of surface treatment as : Gifa Düsseldorf in Germany , Tube Arabia , Steel FAB in UAE , Saudi Build , Metal Expo in Moscow, Metal& steel in Saudi , Metalex , MTA HANOI in Vietnam , Fundiexpo in Mexico , Inometal in indonesia , PDMEX in Philippine .....
To better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.
1. Small spare parts put in plywood wooden cases
2. Other parts is our company standard or according to customer requirements
3. Shipping: Container transport
2. Other parts is our company standard or according to customer requirements
3. Shipping: Container transport
FAQ
Q1. For this particular job, will abrasive blasting be used for surface preparation or as a cleaning procedure?
Q4. If blasting for surface preparation, what surface profile is required?
All coatings have a recommended surface profile (roughness) specification. Excess surface profile can shorten the life of a thin-film, low-build coatings, insufficient profile can cause delamination of high-build coatings.
Q5. Will coating adhesion be affected by surface contamination?
Some abrasives leaving a cleaner surface than others, which can have a substantial impact on coating adhesion.
The difference between these two procedures are as follows:
* When abrasive blasting is used as a surface preparation technique, the intention is to remove all surface contaminants and also prepare the substrate to receive a coating.
* When abrasive blasting is to be used as a cleaning procedure, then the intention is to remove the surface contaminants, while leaving the substrate untouched.
Q2. Will it be possible to reclaim and recycle the abrasive, or will it have a single use only?
The major deciding factor here is cost. The cost of abrasives, while very effective, are uneconomical to use if recycling is not an option.
Q3. Will the worksite be dust sensitive?
The amount of dust generated by different abrasives varies widely. Some excellent types of abrasives are available that are specifically graded to reduce dust.
* When abrasive blasting is used as a surface preparation technique, the intention is to remove all surface contaminants and also prepare the substrate to receive a coating.
* When abrasive blasting is to be used as a cleaning procedure, then the intention is to remove the surface contaminants, while leaving the substrate untouched.
Q2. Will it be possible to reclaim and recycle the abrasive, or will it have a single use only?
The major deciding factor here is cost. The cost of abrasives, while very effective, are uneconomical to use if recycling is not an option.
Q3. Will the worksite be dust sensitive?
The amount of dust generated by different abrasives varies widely. Some excellent types of abrasives are available that are specifically graded to reduce dust.
Q4. If blasting for surface preparation, what surface profile is required?
All coatings have a recommended surface profile (roughness) specification. Excess surface profile can shorten the life of a thin-film, low-build coatings, insufficient profile can cause delamination of high-build coatings.
Q5. Will coating adhesion be affected by surface contamination?
Some abrasives leaving a cleaner surface than others, which can have a substantial impact on coating adhesion.
Q6. Which abrasive provides the maximum productivity?
Abrasive particle size and shape all have an effect on blasting speed. Some factors to consider:
* The ideal abrasive size is where the largest particle is equal to the size of the thickness of the coating to be removed. If the particle size is too large, the “hit rate” is reduced because the grain count in the pot is lowered. If the particle size is too small, the speed of cutting through the old surface is reduced.
* Grain toughness is a term given to describe it’s durability and recyclability. A tougher grain converts more energy into the removal of the old coating, while a weaker grain is more likely to disintegrate on impact.
* Particle shape can either be rounded or angular. The more rounded the particle is, the more contact area it has, which increases the surface removal speed.
* The ideal abrasive size is where the largest particle is equal to the size of the thickness of the coating to be removed. If the particle size is too large, the “hit rate” is reduced because the grain count in the pot is lowered. If the particle size is too small, the speed of cutting through the old surface is reduced.
* Grain toughness is a term given to describe it’s durability and recyclability. A tougher grain converts more energy into the removal of the old coating, while a weaker grain is more likely to disintegrate on impact.
* Particle shape can either be rounded or angular. The more rounded the particle is, the more contact area it has, which increases the surface removal speed.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
