Dl10s Low Intensity Led Aviation Light,Led Aviation Lamp,Obstruct Light
- Category: >>>
- Supplier: Sien Electronics (shanghai) Co. Ltd.Sien Ltd.
Share on (1601358671599):
Product Overview
Description
Introduction
Aircraft warning lights are high-intensity lighting devices that are attached to tall structures and are used as collision avoidance measures. Such devices make structures more visible to passing aircraft and are usually used at night, although they may be used during the day as well. These lights need to be of sufficient brightness in order to be visible for miles around the structure.
The light we produce is maintenance-free, complying with ICAO and FAA international standards.This light can be used for marking obstacles which pose a threat to aircraft, such as telecom towers, buildings, wind turbines, power transmission towers, airports and general aviation warning purposes.
Specification
Main Specification | ||
Product | Single Low Intensity Bulb | |
Intensity | >10cd; >32.5cd | |
Visible Range | >5Km | |
Light Source | Cree High Power LED | |
Light Color | Aviation Red | |
Power | 2W,3W | |
Waterproof | IP23 | |
Operating Voltage | 110~240VAC | |
Warranty | 5 years | |
Products Description
Product Details LIBxxS is E27 aviation bulb that is especially designed for SIEN LILxxS obstruction lights. Its basement is E27 screw. It is quite easy for replacement in case any bulb fails. The intensity of this bulb can be 10cd or 32.5cd. It can be used for SIEN LILxxS obstruction light or replacement of common bulb (incandescent bulb). Its advanced high-power LED with optimized optical design is able to minimal power consumption and maximizes light intensity based on only one single LED, which 90% energy saving comparing to incandescent lighting. Meanwhile increasing safety thanks to low failure LED technology. | ||
Its advanced high-power LED with optimized optical design is able to minimal power consumption and maximize light intensity based on only one single LED. Energy saving compare to incandescent lighting technology. Meanwhile increasing safety thanks to low failure LED technology. Our LED obstruction light offer an ultra bright,energy efficiency, reliability and freedom from maintenance mean that our light will save you money over time! | ||
Features
➢ Cree LED, 100,000 hours lifetime.
➢ One single LED and lens can reach optical requirements, and reduce light pollution so as to improve light efficiency.
➢ It is driven by LED constant current to extend LED life.
➢ Very low power consumption, saving energy.
➢ E27 bulb basement. It is easy for installation/replacement. Free of maintenance.
➢ Body materials: aluminum + ABS.
➢ Resistant to shock and vibrations.
➢ Available in universal AC: will accept between 110-240VAC .
Specification | ||||
Light model | LIB10S | LIB32S | ||
Light source | Cree LED | Cree LED | ||
Intensity | >10cd | >32.5cd | ||
Visible Range | >3.5km | >5km | ||
Horizontal Output(degree) | 360 | 360 | ||
Vertical Output(degree) | 10 | 10 | ||
LED color | Red as standard.Other colors available on request. | Red as standard.Other colors available on request. | ||
Electrical characteristics | ||||
Operating voltage | 110~240VAC | 110~240VAC | ||
Power consumption | 2W | 3W | ||
Driven mode | Constant current | Constant current | ||
Mechanical characteristics | ||||
Body Material | Aluminum | Aluminum | ||
Housing Material | PC UV Stabilize | PC UV Stabilize | ||
Weight | 0.14KG | 0.14KG | ||
Dimension | See diagram | See diagram | ||
Lamp holder | E27 | E27 | ||
Working temperature | ‐40˚C+70˚C | ‐40˚C+70˚C | ||
Humidity | 10% ~95% | 10% ~95% | ||
Wind speed | Up to 150mph(240kph) | Up to 150mph(240kph) | ||
Waterproof | IP23 | IP23 | ||
Product Applications
Certificate
Our Service
We provide 5 years warranties for our products.
Check below important tips before you placing an order :
1.Inquiry-Professional quotation. Please tell us your application for the product(Applying for tower/windturbine/crane/building/chimney/etc). Our sales will offer you with professional quotation basing on your application.
2. Confirm the price, lead time, artwork, payment term etc.
3.our sales send the Proforma Invoice with our seal.
4. Customer make the payment for deposit and send us Bank receipt.
5. Production-Mass production products photos and samples will send to you for approval. You can also arrange the third party Inspection .
6. Clients make payment for balance and Ship the goods , Inform the tracking number and check the status for clients.
7. Order can be say "finish" when you receive the goods and satisfy with them .
8. Feedback to our about Quality , Service, Market Feedback & Suggestion. And we can do better .
Check below important tips before you placing an order :
1.Inquiry-Professional quotation. Please tell us your application for the product(Applying for tower/windturbine/crane/building/chimney/etc). Our sales will offer you with professional quotation basing on your application.
2. Confirm the price, lead time, artwork, payment term etc.
3.our sales send the Proforma Invoice with our seal.
4. Customer make the payment for deposit and send us Bank receipt.
5. Production-Mass production products photos and samples will send to you for approval. You can also arrange the third party Inspection .
6. Clients make payment for balance and Ship the goods , Inform the tracking number and check the status for clients.
7. Order can be say "finish" when you receive the goods and satisfy with them .
8. Feedback to our about Quality , Service, Market Feedback & Suggestion. And we can do better .
Company Profile
FAQ
Q1. Can I have a sample order for led light?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A:Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity more than
Q3. Do you have any MOQ limit for led light order?
A: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
Q5. How to proceed an order for led light?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on led light product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 2-5 years warranty to our products.
Q8: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less
than 0.2%.
Secondly, during the guarantee period, we will send new lights with new order for small quantity. For
defective batch products, we will repair them and resend them to you or we can discuss the solution i
ncluding re-call according to real situation.
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A:Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity more than
Q3. Do you have any MOQ limit for led light order?
A: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
Q5. How to proceed an order for led light?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on led light product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 2-5 years warranty to our products.
Q8: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less
than 0.2%.
Secondly, during the guarantee period, we will send new lights with new order for small quantity. For
defective batch products, we will repair them and resend them to you or we can discuss the solution i
ncluding re-call according to real situation.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
