Professional company testing Service Shock resistance Impact test of Welding material
- Category: >>>
- Supplier: Zhejiang Gangxin Testing Technology Co. Ltd.Zhejiang Ltd.
Share on (1601359859931):
Product Overview
Description
Steel plate/section steel | Chemical composition (spectroscopic method) |
Chemical composition (wet analysis) | |
stretchnational | |
bend | |
Flattening/expansion test | |
Room temperature impact | |
Low temperature shock | |
Z-direction performance | |
Welding materials/welding specimens | Chemical composition of molten metal (light) Spectral method) |
stretch | |
bend | |
impact | |
Macroscopic acid corrosion | |
hardness test | |
fracture test | |
Chemical composition (wet analysis) | |
Connecting fasteners | Tensile test |
Ensure load capacity | |
Wedge load test | |
torque coefficient | |
Fastening axial force | |
Anti-slip coefficient | |
Hardness (washer nut) | |
Connecting auxiliary construction torque | |
Steel truss | Seal plate tension load |
Tensile capacity | |
Bolt ball tension load | |
Metallic material | Grain size |
Nonmetallic inclusion | |
Decarburized layer | |
microstructure | |
Intergranular corrosion | |
Steel wire | Tensile strength |
Modulus of elasticity | |
Yield strength | |
Rate of elongation | |
slack | |
twist | |
entangle | |
Repeated bending | |
Surface quality | |
diameter | |
out-of-roundness | |
Straightening property | |
Coating adhesion | |
Coating quality | |
Steel wire | Coating uniformity |
Plating alloy aluminum content | |
Fatigue test | |
Coating thickness | |
Steel strand | diameter |
straightness | |
Lay length | |
slack | |
Oblique drawing | |
Tensile strength | |
Yield strength | |
Maximum force elongation | |
Modulus of elasticity | |
Coating thickness | |
Coating adhesion | |
Wire rope | stretch |
Surface quality | |
diameter | |
out-of-roundness | |
flatness | |
Stay cable | Dynamic watertightness |
Static watertightness | |
Static load test | |
Stay cable | Visual inspection |
PE protection thickness | |
Anchor plate hole diameter | |
Pier size | |
Cold cast body packing strength | |
Finished length measurement | |
Overtension test | |
Fatigue test | |
Anticorrosive specimen | Neutral salt spray |
Anticorrosive paint | State in container |
No volatile matter content | |
viscosity | |
Adhesive force | |
density | |
Film hardness | |
Abrasion resistance | |
fineness | |
flexibility | |
impact | |
Drying time | |
Film thickness | |
Anticorrosive paint | Water resistance |
Liquid resistant medium | |
hygrothermal | |
Heat resistance | |
Fluorine content | |
Zinc content | |
Artificial aging test | |
Paint film gloss | |
pliability | |
Surface cleanliness/roughness | |
Fire retardant paint | State in a container |
Initial dryness | |
Drying time | |
Bond strength | |
Compressive strength | |
Dry density | |
PH value | |
thickness | |
Thermal insulation efficiency deviation | |
Resistance to heat exposure | |
Resistance to moisture and heat | |
Resistance to freezing cycles | |
Fire retardant paint | Acid resistance |
Alkali resistance | |
Salt spray resistance | |
Resistance to ultraviolet radiation | |
ray | X-ray inspection of welds |
X-ray inspection of welds | |
X-ray inspection of welds | |
X-ray inspection of welds | |
X-ray digital imaging detection (DR) | |
X-ray digital imaging detection (DR) | |
ultrasonic | Ultrasonic inspection of weld |
Plate ultrasonic inspection | |
Ultrasonic detection around the plate | |
Ultrasonic thickness measurement | |
Infiltration | Weld penetration testing |
Sheet permeation inspection rules | |
Fluorescent penetration detection | |
Magnetic particle | Magnetic particle detection of welds |
Plate magnetic particle detection | |
Magnetic particle detection around the plate | |
Fluorescent magnetic particle detection rules | |
Ultrasonic detection by diffraction time difference method | Weld (TOFD) |
Phased array ultrasonic testing | Phased array ultrasonic inspection of steel welds |
Phased array ultrasonic testing | Polyethylene (PE) pipe joint ultrasonic phased array |
vortex | Ferromagnetic tube |
Non-ferromagnetic metal pipe | |
hardness | Hardness test |
Qualitative spectral analysis | point |
Quantitative spectral analysis | element |
1.Q:What's the shipping method?
A:By express way.such as fedex,dhl,tnt and so on; by air;by sea. Shipping cost is decided by shipping ways& product actual weight &volume and your detailed address.
2.Q:What's the Payment method?
A: We support various payment way(T/T,Visa card,Western union, Moneygram,Secure payment-Escrow,etc) T/T
3.Q:Can we print our own brand or logo on your products?
A: Yes, it is our pleasure to be one your OEM manufacturer in China to meet your OEM request
4.Q: Why do some goods have difference between website picture and practical items?
A: Because difference of light and browser,also different batches ,material may be little difference.such as lining, so note products to be previl in kind, sometime,the picture is for reference only.these are allowed in actual case.If any question, please tell us before order and ask clearly.
A:By express way.such as fedex,dhl,tnt and so on; by air;by sea. Shipping cost is decided by shipping ways& product actual weight &volume and your detailed address.
2.Q:What's the Payment method?
A: We support various payment way(T/T,Visa card,Western union, Moneygram,Secure payment-Escrow,etc) T/T
3.Q:Can we print our own brand or logo on your products?
A: Yes, it is our pleasure to be one your OEM manufacturer in China to meet your OEM request
4.Q: Why do some goods have difference between website picture and practical items?
A: Because difference of light and browser,also different batches ,material may be little difference.such as lining, so note products to be previl in kind, sometime,the picture is for reference only.these are allowed in actual case.If any question, please tell us before order and ask clearly.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
