2G Wireless 4 Relay Output Remote Gsm Relay Switch SMS Controller Alarm Gsm Gate Opener

Share on (1601362468923):


Price:$35.00-37.00

Quantity:


Product Overview

Description



Specification


Parameter item
Reference scope
Parameter item
Reference scope
GSM/4G Frequency
GSM:850/900/1800/1900Hz4G LTE
Storage temperature
-20℃~+60℃
DC Power Supply
9-30V DC/1A/1.5A/2A
Relay Type
NO/NC
Power consumption
Max. 55mA/Average 25mA
Relay Time
Max. 0s - 9.5s
SIM Card
Nano type, 3V
Operating Temp
- 10℃ ~ + 60℃
Antenna
50 Ω SMA
Relative Humidity
10% ~ 90%RH
Relay Specification
3A/250V AC | 20A/14V DC
Dimension
96.5×72×59mm
Users
200
Net Weight
188g


Product Display














Product Description


1.Brief introduction
The T400 is a very simple device which can be used for authorized door access, controlling gates, switching of remote
equipment,car parking systems. When we dial to T400,T400 auto answer it ,we can control T400 though the keys on the mobile phone.

2. Features
1.We can control 4 relays by the keys on the mobile phone during the phone conversation 2.Remember relays status when power
failure 3.Automatically report current status by SMS to the 1 st number 4.Multiple applications. (gates, bollards, barriers,
garage doors, shutters and access doors or machines). 5.Secure - Using caller ID for identification, unknown callers are ignored.
6.Can be operated from anywhere, no distance limit. 7.Add or remove users by SMS Text command. 8.The relay close time is
programmable. 9.Up to 200 authorized phone numbers can be configured. 10.Four outputs with relay (3A/240VAC)for connecting the
switch of the door or machines. 11.The relay action will return a SMS confirmation to the owner, this function is editable by
user. 12.Easy to install(Industrial guide rail:35mm) 13.Based on GSM /4G Network, applied to many applications.


2. Control principle
1)Set Authorized number by SMS 2)Dail to T400,T400 will auto answer it 3)Turn on the phone's keyboard,we can control it through
the keys,We'd better turn on the hands free function ,if the relay works ,we can hear the voice prompt to check whether we control
the relay successfully or not The keyboard operation mode is as follows:



Command
Description
voice prompt
1#
Relay1 close
AAON
2#
Relay2 close
BBON
3#
Relay3 close
CCON
4#
Relay4 close
DDDDON
1*
Relay1 open
AAOFF
2*
Relay2 open
BBOFF
3*
Relay3 open
CCOFF
4*
Relay4 open
DDDDOFF
0#
Relay 1、2、3、4 close
ALLON
0*
Relay 1、2、3、4 open
ALLOFF
9#
Inquire the status of all the relays


Notice:
It is best to complete the operation in 50 seconds,If more than 50 seconds, the device will hang up automatically,if you want to
control it again,please dial it again.

6. Settings (SMS Commands)
Notice: 1.The default password is 1234 . 2.All the settings are through SMS commands, please edit the below SMS commands in your cell phone, then send to the T400 Unit.
The unit cannot support PIN Code Protected SIM Card.
3.Remember that commands must be CAPITAL Lock LETTERS . Don't add spaces or any other character.
4.The pwd in the commands means the password, when you use it, please in stand of it by the digital number; the capital letters PWD is the command letter, use PWD directly.
5.If you use the T400 Unit for gate open, you only need to change the password and set the authorized numbers
6.For some GSM operators, they use different SMS parameter, the units cannot return the SMS confirmation. It is not product problem. you can try to add the country code before the number, see the below settings:




7.Please write down the Authorized number list in a paper for review it in the future.
8.If you want to reset the T400 to factorydefault, then please send pwd#RESET# (The unit will reply a message with Reset Success! Please Reboot your Device ) or When theT400 works normally, you can press and hold the RESET button(Open the unit,you will see it) for several seconds until the Run Led
is always ON, and then after 5 seconds ,it will reset the T400 to factory default and reboot automatically at once.
9.If thecommand is incorrect, the T400 will return: Command error, please resend command . Please check the command, or check the input is in ENGLISH INPUT METHOD and CAPS LOCK. 10.The SMS commands that you will certainly use in the T400 are the following instruction:








Packing & Delivery


2.Packing List

Control Unit X1, GSM ANT X1




Company Profile












FAQ


1. who are we?
We are based in Guangdong, China, start from 2014,sell to Domestic Market(30.00%),South America(10.00%),Southeast Asia(10.00%),North America(5.00%),Eastern Europe(5.00%),Oceania(5.00%),Mid East(5.00%),Eastern Asia(5.00%),Western Europe(5.00%),Central America(5.00%),Northern Europe(5.00%),Southern Europe(5.00%),South Asia(5.00%). There are total about 51-100 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
Underground Gate Opener,Curve Arm Gate Opener,GSM Gate Opener,Swing Gate Opener,Sliding Gate Opener

4. why should you buy from us not from other suppliers?
Chisung Company is a technology company(manufactory).We have 30 years of production experience and over 30 different sets of gate openers. All the hardware and software technology is designed by ourselves ;ODM/OEM to meet to the different clients demand.

5. what services can we provide?
Accepted Delivery Terms: FOB,CIF,EXW,DDP;
Accepted Payment Currency:USD,HKD,CNY;
Accepted Payment Type: T/T,L/C,Western Union,Cash,Escrow;
Language Spoken:English,Japanese


0.1982 s.