Free Design Medical High Precision Laparoscopic Surgery Part Stainless Steel Micro Surgical Forceps
- Category: >>>
- Supplier: Micro MIM Japan Holdings Inc.
Share on (1700001096383):
Product Overview
Description
Micro-precision parts
for medical devices
Long | Short | ||
Part name | Forceps for surgery (disposable medical device) | ||
Materials | Stainless steel (SUS304L) | ||
Size | 8.5(10.0) x 2.5 x 1.5 | 7.0(8.5) x 2.5 x 1.5 | |
Weight | 0.044 g | 0.037 g | |
Tolerance | ±0.01mm (when 5mm or less) | ||
Advantage | Chucking is difficult and very expensive when producing by machining. | ||
These forceps are used as disposable parts of endoscope system. Forceps are used to clip pieces of tissue, e.g. blood vessels, intestine, nerves. Depending on the application, it may be categorised as gripping forceps, cutting forceps etc. - used in wide ranging
surgical scenarios.
Generally, the forceps for endoscope is very small with special complicated design,
therefore it must re-use due to its production limitation.
When you try to manufacture such forceps with CNC machining, chucking becomes more difficult. On
the other hand, with MIM technology no chucking is required, thus it leads to stable mass production.
However, conventional MIM is not capable to realise the tight tolerance requirement in medical forceps.
Our μ-MIM® technology is often used for endoscopic and surgical device components mass
production as we can meet demands of high precision, complex design. μ-MIM® technology is capable
to mass produce different material including nickel-free stainless steel material with quality assurance
according to ISO13485.
production as we can meet demands of high precision, complex design. μ-MIM® technology is capable
to mass produce different material including nickel-free stainless steel material with quality assurance
according to ISO13485.
These picture forceps are made of stainless steel 304L.
The required tolerance is ±0.01mm on the 0.5 mm diameter hole. The size is 10 x 2.5 x 1.5mm.
The weight is 0.04g. Smallest part thickness is 50 μm.
The required tolerance is ±0.01mm on the 0.5 mm diameter hole. The size is 10 x 2.5 x 1.5mm.
The weight is 0.04g. Smallest part thickness is 50 μm.
Recommend Products
Gear
Medical forceps
Other
Micro MIM Japan Holdings Inc. and its group companies cooperate as a team to cater for various needs of our customers from different parts of the world.
Manufacturing section: Taisei Kogyo Co., Ltd., TAISEI KOGYO(THAILAND) CO., LTD.
Taisei Kogyo Co., Ltd. was established in January 1972 as a plastic injection moulding manufacturer. Aside from improving our technology in the plastic injection moulding, we organised an R&D group in Kyoto Research Park about 25 years ago, to start researching on MIM technology. We utilise our knowledge and experience from the plastic injection moulding and developed original MIM material (binder system and feedstock), which makes it possible to manufacture small and complex shaped MIM components for serial production. Taisei Kogyo Co., Ltd. has obtained ISO13485 in May 2019. TAISEI KOGYO (THAILAND) CO., LTD. was established in August 2011 and started its operation in 2012. We maintain the same production standard as Japanese factory.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
