Gypsum Based Machine Applied Satin Plaster SATENMATIK

APPLICATION

SURFACE PREPARATION
* The surface will always be free of form oil, dust, paint and materials that reduce adherence.
* Repair of the cracks and holes should be made using appropriate Entegre Repair Mortars before application.
* Application surface should be dampened with water, if required. PRİMEL 600® BETOKONTAK is applied to the surface to improve adherence performance on very bright and smooth surfaces.
* You can advance to application of SATENMATIK® when the surface is cured.

PREPARATION of the MORTAR

* SATENMATIK® should be mixed with ready-mix plaster mixer (15.5-16.5 l water/40 kg bag) and sprayed to the surface.
* Application thickness should be between 3 and 8 mm in one coat.
* Surface must be leveled.
* When the surface is hardened so that it is not possible to level the surface 45-60 minutes after this operation, plaster surface should be compacted and smoothed using a steel scraper.
* When the surface reaches the adequate hardness, it should be lightly dampened and smoothed with a sponge and satin surface shall be removed.
* After about 1 hours, when the surface is hardened adequately, it will be watered and smoothed with a steel trowel.

CONSUMPTION

Approx. 1.0 kg/m² for 1 mm of plaster thickness