Cement Based Elastic Grout Silicone Reinforced (Resistant to Growth of Mold and Fungi) CG2WA FUGAFIX SLK SUPER FLEX
- Category: >>>
- Supplier: ENTEGRE HARC SANAYI VE TICARET ANONIM SIRKETI
Share on (1700003054375):
Product Overview
Description
Product Description
FUGAFIX SLK SUPER FLEX
Cement-Based Elastic Grout
Reinforced with silicone and resistant to growth of mould and fungi.
Grout for joints from 1 to 20 mm width
FIELD OF APPLICATION
Used for filling of joints of coating materials such as ceramic, granite, natural rock group, etc. with a joint gap of 1-20 mm on horizontal and vertical applications in all wet environments in interior and exterior areas.
Suitable for the joints of coating materials in the pools, terraces, and ceiling terraces.
It may be used on floorings with floor heating system, floors exposed to high level of traffic, cold storage rooms, floors exposed to vibration, and ceramic modification applications.
CHARACTERISTICS
Provides a high performance with its elasticity.
May be cleaned easily.
Provides high performance on pool applications.
Resistant against growth of mold and fungi.
Provides a smooth and bright surface.
Has a high Abrasion Resistance.
Highly water repellent.
Resistant to water and freezing.
APPLICATION
SURFACE PREPARATION
Scrape any dust, chipping, construction-cement waste that may be present inside the joint hole and clean with a brush before application.
Joint hole shall be dampened with water before application, if required.
PREPARATION AND APPLICATION OF THE MORTAR
Water shall be put to the mixing container first, then FUGAFIX SLK SUPER FLEX® shall be added (6.5-7.5 l water/20 kg bag) and it shall be mixed until the lumps are removed.
It is recommended to use a hand mixer at low speed for mixing. Wait for 5 minutes, and mix again to achieve a homogeneous mixture.
The mortar prepared shall be applied with a rubber ended scraper or a rubber trowel with a suitable thickness.
Approximately 30 minutes after the application, surface shall be cleaned with a damp sponge. This period may be shorter for coating materials with heated surface or with high water absorption rate and for applications that are performed under improper conditions.
Fluctuation may occur on the joint surface when the wiping operation is performed before its due time or with an excessively dampened sponge. Sponge shall be cleaned frequently.
After ensuring that FUGAFIX SLK SUPER FLEX® is cured so that it shall not be drained from the joint gap, clean any residues on the surface with a dry cloth.
Application surface shall be damped at least 1 days after the application.
When the surface cleaning operation is not performed adequately, the joint filler residues on the coating may be cleaned with a suitable cement stain remover (PRIMEL 300) after 10 days.
TECHNICAL DATA
Application Time, hours < 2
Water Absorption, 30 minutes later, g (EN 12808-5) ≤ 2
Water Absorption, 240 minutes later, g (EN 12808-5) ≤ 5
Shrinkage, mm/m (EN 12808-4) ≤ 3
Bending Strength After Dry Storage, N/mm² (EN 12808-3) ≥ 2.5
Bending Strength After Freezing-Thawing Cycle, N/mm² (EN 12808-3) ≥ 2.5
Compressive Strength After Dry Storage, N/mm² (EN 12808-3) ≥ 15
Compressive Strength After Freezing-Thawing Cycle, N/mm² (EN 12808-3) ≥ 15
Abrasion Resistance, mm3 (EN 12808-2) ≤ 1000
PACKAGING AND STORAGE
Available in 5 kg polyethylene bags and 10 and 20 kg polyethylene-reinforced paper bags, delivered in pallets or as sling-bags upon request.
Storage period; It is recommended to be consumed in 6 months from the date of production if stored in its original package without opening the package under dry, frost free conditions and is stacked as maximum 8 bags, and in 1 week after opening the package.
Packages shall be tightly closed when it is not used.
RECOMMENDATIONS
* No other materials (lime, cement, gypsum, etc.) shall be added to the prepared mortar.
* Plaster shall not be used again by mixing with water or dry plaster if its application time has expired.
* Wait at least 24 hours for joint application after fixing operation.
* It is recommended that the application shall be performed between +5°C and +35°C.
* It shall not be applied on frozen surfaces.
* A suitable cement cleaning agent (PRIMEL 300®) shall be used for cleaning of the contaminated joints.
* To prevent damage to the coloured joint fillings, do not use strong chemical cleaning agents such as lime remover,
hydrochloric acid, etc.
* Do not go beyond the application field and the rules.
* Do not inhale it directly. Wash your eyes with plenty of water in case of contact with eyes, seek medical attention if
required.
* Wash your hands and application tools with plenty of water after application.
* For detailed information, please request the safety data sheet.
* Contact us for your technical questions and for your questions about all other application conditions.
CERTIFICATE OF CONFORMITY
CG2WA
Ürün adı: | Cement-Based Silicone-Reinforced Grout Mortar |
Renk: | White, Grey |
Teslimat süresi: | 2 week |
Related Products
Company Profile
Entegre Harç Company, which was founded for the production of industrial lime in İstanbul in 1978 by 18 entrepreneurs, was taken over by Ata Construction Group in 1989. It was converted into Lafarge Group (world leader in the production of building materials) and Ata Holding joint venture in 1995.
Entegre, had undertaken the leadership of machine applied plaster sector in the Turkish market with its innovative structure, launched the first Cement based machine applied ready to use plaster “Sıvamatik” in 1990, the first Gypsum Plaster Based Machine Applied ready to use “Alçımatik” in 1991, Cement Based Machine Applied first coloured plaster “Colormatik” in 1996. With this innovative and pioneering approach, Entegre has a wide range of products that add value to buildings and offer quality and cost-effective solutions in every part of the building.
Entegre’s product range consists of Cement Based Plasters, Decorative Plasters, Technical Mortars, Water Proofing Products, Thermal Insulation Products, Tile Adhesives and Joint Fillers, Lime and Aggregate product groups.
Entegre continued its investments as a 100% Ata Holding subsidiary after Ata Holding acquired Lafarge shares in 2006, and commissioned Burdur Factory in 2006 and Ankara Factory in 2015.
Without compromising on quality in its service approach, Entegre has determined the satisfaction of its customers and employees as well as its sensitivity to society and the environment as a priority. Entegre, with its advanced production technology, high capacity, high quality and wide range of products, continues to serve in the sector.
Certifications
Packing & Delivery
Contact US
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
