Заготовка для ножей и мечей из дамасской стали ручной работы, 10 дюймов

produce 3PS  4PS 5PS 5SP 4SP  mild steel billets

Please contact to us if you need buy  other equipment ,such as EAF, LF,Electric induction melting furnace, CCM continuous casting machine ,Rolling mill to produce rebar . We are biggest metallurgy machine Group Factory

Billet is produced by three kinds of process methods:

One is through the steel system of continuous casting equipment, molten steel directly into the steel billet;

The two is the making system of production of steel ingot or billet by rolling system of steel rolling equipment processing semi-finished products; three is the production of steelmaking system by ingot forging equipment manufactured semi-finished products.

Material standard

Thickness range: +/-5mm 150-240mm width: +/-20mm 880-1530mm

Length range: +/-500mm 3700-10000mm

Cross section size: 64*64; 82*82; 98*98; 124*124; 120*150; 152*164; 152*170mm

Length: 9000mm

Section tolerance: square billet: +1.0/-2.0----+3.0/-1.0mm slab: width: +/-2.0MM thickness: +/-3.0MM

Length tolerance: +/-200MM

Diagonal tolerance: 3.5-8.0MM

Square billet section size sudden requirements: <1242MM, does not allow; <=2MM, >1242MM =1242MM, <=3MM

Broken end (shear) extended deformation: <1242MM square billet: no control; slab: <=15MM

Surface tilt: no more than 0.1 of the billet cross section

Bending degree: each 1M length does not exceed 10MM

Twist degree: length <=5M, <=11. Length <=7.5M, <=5.

Material 3SP/PS% of chemical composition: Mn Si S P C