Taiwan Mechanical Auto Feed Precision Lathe For Sale
- Category: >>>
- Supplier: PROMPT INTEGRATED TECHNOLOGY LTD.
Share on (1887676636):
Product Overview
Description
Product Description
Conventional Lathe
Features:
- Selective bed width: S series: 300mm / M series: 350mm / L series: 400mm
- Varied spindle bore diameters: S series: Ø58mm / Ø80mm (Option) & M series: Ø85mm / Ø105mm (Option) & L series: Ø85mm / Ø120mm (Option)
- With FAG or SKF precision bearings installed on spindle, maximum cutting depth can be 8mm on 50mm diameter and best roundness 0.003mm (200mm long)
- Equipped with plastic rear gears, shafts and gears inside headstock are well protected if crash should occur (PML430 & PML470S)
- Thermal treated and precision ground alloy gears
- Universal gearbox for both imperial and metric thread-conversion table also attached
- Tracks of cross slide and bed are well lubricated with lubrication pump (manual)
- Overload device to ensure safety when operating
- Wear-resistant phosphor bronze lead screw nuts
- Durable reservoir oil bath type cross slide (for S series)
- Thermal treated Meehanite bed casting
- One piece base for high rigidity and low vibration
- High-capacity coolant tank offers sufficient coolant output
- All series certified for CE
Specifications:
Item | PML 560L |
Specifications | 2240.2260.2280.22100.22120.22160 |
Swing Over Bed | 560 mm (22”) |
Swing Over Cross Slide | 340 mm (13-1/3”) |
Center Height | 280 mm (11”) |
Center Distance | 1000.1500.2000.2500.3300.4300 mm (40”.60”.80”.100”.132”.172”) |
Swing Over Gap | 788 mm (31”) |
Bed Width | 400 mm (15-3/4”) |
Spindle Nose | ASA D1-8 / D1-11 (Opt.) |
Spindle Bore | 85 mm (3-1/3”) / 120 mm (4-1/2”) (Opt.) |
Taper of Spindle Bore | MT #7 |
Spindle Speed | 15~1500 rpm (12 steps)-spindle bore: 85mm / 10~1000 rpm (12 steps)-spindle bore: 120mm |
Inch Threads Range | 2~58 TPI |
Metric Threads Range | P0.5-P14 |
Longitudinal Feeds Range | 0.05~0.82 mm (0.002~0.032”) |
Cross Feeds Range | 0.02~0.4 mm (0.001~0.0094”) |
Leadscrew Diameter | 38 mm (1-1/2”) |
Leadscrew Pitch | 4 TPI or 6 mm |
Taper of Tail Center | MT #5 |
Tail Spindle Travel | 165 mm (6-1/2”) |
Tail Spindle Diameter | 85 mm (3-1/3”) |
Main Drive Motor | 10 HP (7.5 KW) / 15 HP / 6P (11 KW. Opt.) |
Coolant Pump | 1/8 HP (0.1 KW) |
Compound Rest Travel | 200 mm (8”) |
Cross Slide Travel | 375 mm (14-3/4”) |
Machine Dimension | L: 238.290.347.398.473.555 cm W: 103 H: 126 cm |
Packing Dimension | L: 270.315.361.410.485.588 cm W: 115 H: 196 cm |
Net Weight | 2200.2550.2900.3150.3650.4860 kg |
Gross Weight | 2300.2650.3050.3300.3800.5060 kg |
Standard Accessories:
Tool box 1pc |
Centers 2pc |
Safety pin 1pc |
Screw wrench for cutter setting 1pc |
Back plate 1pc |
Coolant system 1set |
4-way tool post 1set |
Auto-feed stopper ring 1set |
Center sleeve 1pc |
Leveling pads 1set |
Optional Accessories:
3-jaw scroll chuck |
4-jaw independent chuck |
Face plate |
Steady rest |
Follow rest |
Work light |
4-position carriage stop |
Micro carriage stop |
Live centers |
Rear cutter rest |
Taper turning attachment |
Rear splash guard |
Rapid traverse (L series) |
Chuck guard |
American tool post (S series) |
Change gear for D.P and module thread |
5C lever collet closer |
Driving plate |
Quick change tool post |
Digital readout |
Hydraulic copying machine |
Chip guard |
ID/OD grinder |
*If you have any further discussion or information, please feel free to contact us directly. Thank you.
Company Information
Our Services
|
|
Pre-Sales Service Inquiry and consulting support View on factory |
After-Sales Service Field installation, maintenance and repair Training on machine operation Engineers available to serve overseas |
Certificate
Packaging & Shipping
Our delivery service is good patient, courteous and try our best to meet customer requirement.
FAQ
We Recommend
New Arrivals
New products from manufacturers at wholesale prices