Insulation Nails In Thermal Insulation Board Fixing with all sizes

  Insualtion Nails, also called insulation nails fixing, insulation anchor,external wall insulation anchor for fixing. It is widely used in external wall insulation system for insulation board or insulation material fixing, its an special engineer plastic nails.

1. Discriptions of our insulation fixing nails:

a. Insulation Nails Material: Original HDPE for plastic anchor, stanless steel 65# pin nails.

b. Insulation Nails Plastic anchor Length: According to the insulation board thickness, the  insulation fixging nails has various of specification. This is the sizes our factory can  do 20mm, 30mm, 40mm, 50mm, 60mm, 70mm, 80mm, 90mm, 100mm, 110mm, 120mm,130mm, 140mm, 150mm, 160mm, 170mm, 180mm, 190mm, 200mm, 210mm, 220mm, 250mm. Also our factory accept customization. If you have drawing, we can also open new moulds as you need.

c.  Insulation Nails Washer diameter: 5.0cm, 6.0cm

d.  Insulation Nails Pin Nails Length:42mm,47mm,52mm, 62mm or as you need.

e. Insulation Nails Pin nails Diameter: 3.6mm steel nails or 3.3mm~3.6mm plastic steel nails.

f.   Insulation Nails Perfarmance Parameters: 1> Breaking Elongation:90

                                             2> Operation temperature:200

                                             3> Thermal Conductivity:0.03

3. Many customer wants to know that how does the insulation fixing produced in our factory? Let me via a photo show you clearly!

 In our factory worshop, we have 15-lines producing machine who is producing insulation fixing nails machine. And about 40,000pieces production can be produced for a machine-line per day. This automatic machine can produce verious kind of insulation nails as you want through changing the inner moulds. So if you need some special products, give us your darwing or tell us, we can also help you producing them. 

4. Our Advantage: Automatic injection-moulding machine.

Plastic insulation nail are made by largely automatic injection-molding machine to produce.

1. Breakthrough traditional of insulation shooting nails limited, Provides newsolution programme for insulation system of construction;

2. Tight speed 10 times above than traditional drilling and ancher way,construction speed 6-8grain per minute;

3. Avoid complex steps of drilling, tight directly. And no dust of drilling producing;

4. Without power supply,conveinent and practical;

5. Suit for sand-lime bricks,concrete and steel substrates;

6. Applicable to all kinds of insulation materials, such as glass wool, rock wool and so on;

7. The low heat conductivity doesnot sffect the insulation effection;

8. No presure for insulation board;

9. Application of insulation thickness 20-250mm.

5.Insulation Nails Packing For Export.

A. plastic wrap bag+nelon/plastic bag. Normally we supply plastic bag and cartons packing for export. Quantity:500PCS/CTN, 1000 PCS/CTN, 2000PCS/CTN .Or CARTON QUANTITY AS CLIENTS REQUIREMENT.

B. plastic warp bag + cartons + pallet + plastic wrap.

6.Best Service.

Started in customer demand, Finally customer satisfaction!

A. Train services:attentive service will be followed before,in and after buessiness,to give you the most detailed answer. 

B. Deliver quickly:our professional team will deliver goods as soon as possible.

If you have any need, feel free to contact us!!

7. Clients Frenktly Asked Question.

1>What's your MOQ? And how does your delivery?

     We have 8 machine can produce insulation nails and comcon insulation nails, no less than 20,000pcs one machine in a day. Our factory daily output is at least 160,000pcs. MOQ is 200,000pcs in usual. But if your order cannot reach this limit,also want to purchase our products. Don't worry, We also  accept sample orders, if the producing is not too tight.

     Delivery as your order quantity.

2>What payment terms do you accept ?

     At least 30% TT deposite,the remain balance  paid before loading in our factory. 

3>What's your Washer Diameter?How about your quality?

    Our insulation shooting nails Plastic washer is 5.0cm now. Many customers want washer 6.0cm. Please don't worry. Our factory has areadt mouldding the new moulds of 6.0 washer insulation shooting nails. Its quality and stype is better than 5.0 now. Pla also donot worry about our 5.0 quality. All use vrigin high quality material and recognizaed by our old customer. Welcome new customer purchase our insulation nails win your contry market.

4> Can you make customer version?

    Yes. We have 8 Auto- injection machine now. Just you have the drawing, we can molud the products as you want.

  Langfang Rongfeng Plastic Products Co.,Ltd. is a manufacturer of insulation nails, plastic discs, The valve of injection molded parts, Anchor bolt and any of the plastic products,with well-equipped testing facilities and strong technical force. 

  Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs. Welcome new and old customers from all over the word to contact us for future business relationships and mutual success!