1. About Clear
|Spray booth HX-800|
Outside Size (mm)
Inside Size (mm)
Rock Wool colorful steel skin boards,50 mm thick, 0.5 mm steel, compound construction, anti-flame and heat-insulation, handiwork door, galvanized steel roof panel
Two grids & three embossed plates, Galvanized Steel Sheet Construction, Two Ramps; or customized
Air Circulation System
Blower capacity: 25,000 m3/h
Blower capacity: 25000 m3/h
Power: 7.5 kw/set
Power: 7.5 kw/set
Quantity: 1 sets
Quantity: 1 set
Air Volume: 25,000 m3/h; Air Speed: 0.35m/s;
Air recycling times: 280 times/h;
Dual-filtering structure, The primary filter can capture granules larger than 10 μm. Ceiling filter can capture granules bigger than 4 μm. Its filtering ratio reaches 98%. Air pressure balance gauge, TSP≤1.4 mg/m3
Riello Burner RG5S diedel burner, 200000Kcal/h;
SUS304 stainless steel heating exchanger, argon arc welding;
max temp: 80°C, heating time: 4-6min ( 20-60°C)
Fuel consumption: 4-5kg/vehicle;
Ceiling Light: 36pcs 36w Philips Lamp;
Bottom Light: 32pcs 36w Philips Lamp, 900Lux
Micro-computer programmed controlling,spray & baking switch, light switch, emergency stop, and breakdown.
Multi-lagers fiberglass filter, active carbon
Propane or Natural gas heater, Full grids, PLC control panel, Rock wool panel
Part Two: Photographs of car spray booth, paint booth with CE and ISO9001:
2) Components of truck spray paint booth
Rock Wool Panels and EPS wall panels are options;
Basement: Two grids & three embossed plates; FUll GRIDS AND WITHOUT GRIDS ARE AS OPTION;
Riello Brand G20 diesel burner and exchanger
Lights: Ceiling lights and Buttom (side) lights, 900LUX-1000LUX;
CE approved with top quality:
Packaging & Shipping
1.Export professional packages, or as customers' requirements.
2.All the parts of the painting booth will be labled with their name so that our clents can clearly check each parts with the product sheet.
3. If our cluents have their requirements about the packages, we will do upon these requirements.
1. Can you supply the booth with different sizes and specifications?
Yes, we can. The customized paint booths are availabe based on our rich experience. Not only the sizes, but also the wall panels, the draft ( down draft, back draft, side draft), the heating system ( diesel burner, electric heating or gas), the colors and so on, can be customized upon your requirements. So if you have any question, just feel free to contact with us. We will be there for you at any time.
2. Is it hard to assemble the paint booth?
Usually, we will make the installation drawings expecially for every client. The drawing is 3D drawings, so it is very easy for you to assemble the booth after receive it.
3. What is the payment method?
The payment method is T/T, 30% deposit, and 70%balancement received before deliver the booth.