Modbus программируемый контроллер шагового двигателя 12V KLS16 PCB A12
- Category: >>>
- Supplier: Ningbo KLS Electronic Co. Ltd.
Share on (2022112512):
Product Overview
Description
Modbus Programmable Stepper Motor Controller
Item Code:12V KLS16-PCB-A12
Features:
Modbus Programmable Stepper Motor Controller 12V
Up to 120 instructions can be programmed into the controller for 1 motor, 80 instructions for 2, 60 instructions for 3 and 50 instructions for 4 motors. Instructions are saved in EEPROM and are retained through power loss. Just program once and then let it go. Ideal for repetitive process tasks involving stepper motors, the unit provides 8 digital outputs which can be used as the direction and step signals. The outputs can also be used as general purpose digital outputs when not being used for motor control and the 4 digital inputs can be used for limit switches or program control. Now 2 Relays have been added for additional control.
Instructions include:
Absolute Move
Relative Move
Move and Wait for Limit Switch
Wait x milliseconds
Digital/Relay Output On/Off
Set Max Stepping Rate
Set Start Stepping Rate
Set Step Increment
Set Motor Position
Wait for Input (Rising, High or Falling)
Jump to Instruction x
If Jump. If the input is present do the following instruction otherwise jump to line no xx
Jump to Start
The program can be instructed to run once, a number of times or continuously.
Finished Dimensions (mm): 78Wx92Lx25H
Available as (12V Powered) or KTB-193 (24V Powered).
FAQs:
Q1. Will the push a 3 amp load constantly?
A1. The only produces the step and direction signals which in turn are connected to a stepper motor drive and motor. It does not output the current to drive the motor coils on the stepper motor (therefore amperage doesn't matter).
Programmable Stepper Motor Controller:
MOTOR SPEEDS UP TO 14.5K Steps/Sec
Based on the Serial Stepper Motor Controller the introduction of a more powerfmicro-controller has allowed us to produce a standalone 4 axis stepper motor controller which can be programmed via a PC using supplied software. Alternatively the card can be controlled via a PLC to free the PLC from complex stepper motor control routines. Up to 4 cards can be controlled from a PLC using the Modbus protocol.
--------------------------------------------------------------------------------------
Other PCB * PCB Assembly
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
