Qualified Plastics AC Blowing Agent Azodicarbonamide

Product Introduction

This foaming agent is mainly used in extruding foaming of PVC, TPR and PS for making pipes, plates, and section materials, and used in injection molding of them to make toys and other articles.

Characteristics

Self-formed nucleusi

Stable performance of final products

Controllable foaming

Uniform and fine cells

Application

This foaming agent features a good compatibility with PVC and TPR, so they will disperse evenly in the molten resins during processing to form a system with uniform phases, which in turn helps to maintain a uniform performance in the product.

Endotherm-exothem balanced foaming agents can balance the heat generated by AC decomposition to eliminate such problem as unstable bubble holes and shrunken holes caused by the lower adhesiveness of molten resin, so that bubble holes in the product becomes uniform and dense.

The decomposing temperature of endotherm-exothem balanced foaming agents fall in the range of temperature for PVC processing, no induction term is needed for decomposition, the gas release is even and without eruption, and nuclei will be formed by themselves. These entire characteristics make the foaming process become more controllable, which guarantees the stability of performance of the foamed product with greater thickness and complex shape during the dynamic foaming process.

Technical Index

Item No.:                                          AC233

Chemical component:                      Azodicarbonamide

Appearance:                                     Light yellow powder               

Gas Volume ml/g (STP):                170±10

Decomposing Temperature (°c):    165-180   

Particle size (μm):                           8~10

Moisture:                                           ≤0.3%

Package and Storage

This foaming agent has excellent store stability under common temperature but should be stored in a cool and dry place, away from any sources of heat, spark, open flames or direct sunlight. Never let it directly contact with acids or alkalis. Good local exhaust ventilation in mixing and handling areas is highly recommended. Be careful not to inhale its powder, make frequent skin contact or swallow it.

Each 25kg of this foaming agent is packed in an international standard corrugated paper carton or fiber drum with a polythene liner inside.

Each batch of this foaming agent series weighs 3 Tons. While using the foaming agent of same batch, only a small quantity is needed to test for confirmation and then the whole batch can be used with certainty.