hand sanitizer raw material APG0814

Product Overview

Description

 

Hand sanitizer raw material APG0814 is a new non-ionic surfactant with Comprehensive performance. It is obtained by the condensation of fatty alcohols with glucose. Using sodium hydroxy to make alkali. Glucoside deliver from corn starch. The raw material of APG source from natural green plant, can be biodegradable absolutely, so it is belong to environment friendly products. It has a good compatibility with any surfactant as non-ionic surfactant. It has no poisons on people, mildness and no stimulate to skin. It is stable in the strong base, hard water.

APG is widely used in Shampoo, bubble bath, cleaning lotion, skin care products, dishwashing detergents. Cosmetic emulsifiers. Hard surface cleaners, industrial cleaners, adjuvants for textile, pesticide.

 

Name	APG0814
INCI Name	COCO-GLUCOSIDE
CAS No.	141464-42-8
C-chain distribution	C8      33%~40% C10     21%~28% C12     27%~32% C14     9%~12% C16     Max. 1,0%	C8      25%~30% C10     20%~25% C12     35%~40% C14     12%~18% C16     Max. 1,0%
Appearance, 25°C	Pale yellow liquid	Pale yellow liquid
Active Content (100-water, wt %)	≥50.0	≥50.0
pH (10%aq solution)	11.5-12.5	11.5-12.5
Free Alcohol (wt %)	≤1.0	≤1.0
Ash (wt %)	≤4.0	≤4.0
Viscosity (mPa·s), 20°C	1500-2500	2500-3500
Butyl glucoside	0	0
Water (wt %)	47-50	47-50
Density (g/cm3), 25°C	1.07-1.09	1.07-1.09
DP	1.3-1.5	1.3-1.5
Surface tension (mN/m), 25°C, 0.1%	28-30	28-30
Microorganism (Total viable count , CFU/g)	≤10	≤10

 

APG0814 combines excellent foaming and hydrotroping properties of APG0810 and superior emulsifying and thickening properties of APG1214. As an APG product, APG0814 is mild and readily biodegradable. It is widely used in the following areas: personal care products and household detergents: such as shampoo, body-cleanser, cream rinses, hand sanitizer and dishwashing, etc; hard surface cleaning; scouring agents in textile industry with alkaline stability and high temperature resistance.

Due to the presence of magnesium oxide (max. 200ppm) and the high pH value, turbidity, which has no negative effects on performance, may occur when the product is stored at room temperature. When the pH value is adjusted to neutral, its turbidity disappears.

There may be sedimentation depending on storage time. In this case, the product should be heated and stirred until uniform before use.