IS80 65 160 Single stage Centrifugal Pump

Product Overview

Description

IS80-65-160 Single-stage Centrifugal Pump

 

Model Definition
IS50-32-160
IS is Fluorin plastic Centrifugal Pump
50 is suction diameter(mm)
32 is drainage diameter(mm)
160 is nominal diameter(mm) of impeller
Typical application
Any concentration of acid alkali, salty solution, Strong oxidants, organic solvent etc. Strongly corrosive medium.
Petrol, Chemical, pesticide, acid cleaning, dying, paper making, galvanization, etc.
Structure feature
SZ pump has one impeller, axial suction and radical discharge
Simple structure, shaft is directly connected with impeller.
Easy for pipe works, inlet and outlet are connected by standard flanges.
Wet parts are made of F26.F46, accessories are made of cast iron(HT200)
Operation conditions
Thin medium not containing grain or fiber.
Medium temperature: -20°C ~ 120°C ;
Medium density: Max 1.35×10³kg/m³
Ambient temperature: Max+ 40°C
Altitude: Max 1000m
Pressure: Max 10bar
Installation conditions
When installation, please make sure the pump would not be effected by the pipeline force when pump operation.
The pump should be strongly fixed on the horizontal base.
In order to make motor work well, pump should be installed on the frozen-free and ventilate place.
The electric protection devices should protect pump from being damaged by phase lack, unstable voltage, electric leakage, overload.
Motor
TEFC motor, 2 pole.
Protection class: IP55
Insulation level: CLASS F
Standard voltage: 50HZ, 3×380V
Curve notes
The following notes are for the curves in the following.
Curve tolerance complies to ISO 9906, appendix A
All the curves are based on the motor of constant speed 2900rpm, 50HZ, 3×380V
The pumps were tested with 20°C non-air water, kinematic viscosity is 1mm 2 /s.
It is suggested to operate the pump in the scope of the bold curve, to prevent motor from overload.
If the density of the pumped liquid exceeds the density of the operation condition, appropriate bigger power motor should be used.
Performance curve
Q/H: means the curve of the flow and head at the nominal rotating speed.
Power curve: P2 means the input power if the medium density is 11×10³kg/m³
Efficient curve: Eta means the pump efficient.
Product Power: 1.1-18.5KW
-- View technical --

 

Model	Power	Flow	Head	Speed
	KW	m3/h	m	rpm
IS80-65
IS80-65-125/5.5	5.5	100	13	2900
IS80-65-125/7.5	7.5	100	18	2900
IS80-65-125/9.2	9.2	100	23	2900
IS80-65-160/11.0	11	100	27	2950
IS80-65-160/15.0	15	100	36	2950
IS80-65-200/18.5	18.5	100	45	2950
IS80-65-200/22.0	22	100	53	2950
IS80-65-200/30.0	30	100	66	2950