HSS M2 Factory Standard Module Involute Spline Hob with PA30

Product Overview

Description

HSS M2 Factory Standard Module Involute Spline Hob with PA30

 

Accuracy  : ClassA  ,ClassB

 

Specification table of involute spline hob cutter :  

 

Module	Outside Dia.	Overall Length	Hole Dia.
0.5	45	30	22
0.8	45	30
1.0	50	40
1.25	50	50
1.5	50	50
2	63	60	27
2.5	63	60
3	70	70
3.5	70	70
4	80	80	32
5	90	90
6	100	100
8	112	110	40
10	140	140

 

  

 

 

 

 

 

 

Hob cutter series :  gear hob , pre-shaving gear hob, pre-grind gear hob, involute spline hob, parallel side spline hob, ground sprocket hob , and timing pulley hob.

 

 

Production process of HSS M2/M35 m0.5~m10 module DP involute spline hob cutter with TIN : 

 

 

  

 

 

Material Introduction:

 

A. W6Mo5Cr4V2 (GB)  M2( ASTM), S6-5-2(DIN), SKH51(JIS)
   chemical composition:C 0.85, Si 0.38, Mn 0.35, P≤0.030, S≤0.030,  Cr 4.10, W 6.00, Mo 4.80 V 1.85
   main application:It is widely used for making all kinds of cutters and durability cold-work die

 

B. W6Mo5Cr4V2Co5 (GB), M35( ASTM), 1.3243(DIN), SKH55(JIS)
   chemical composition: C 0.93, Si 0.38, Mn 0.35, P≤0.030, S≤0.030, Cr 4.10, W 6.30, Mo 4.80 V 1.85, Co 5.00
   main application:It is often used for making blades with  high-speed and great cutting difficulty as it’s good abrasive resistance

 

 

W6Mo5Cr4V2(M2),W9Mo3Cr4V(W9),W18Cr4V(W18),W6Mo5Cr4V2Al(M2Al),W6Mo5Cr4V2Co5(M35),W2Mo9Cr4VCo8(M42),W4Mo3Cr4VSi(4341),W4Mo2Cr4VSi(4241)