KM Advanced Engine Flush Lubricates & Protects Engine

 KM Advanced Engine Flush is the only engine flush that add lubrication and protection to your engine while cleaning.

KM Advanced Engine Flush is an environmental eco friendly solution. It is non toxic and qualified with REACH Compliance ( requirement to sell in Europe). Special formulation designed to dissolve sludge and clean the crankcase to enhance the life of the fresh engine oil. Clear out deposit to open narrow oil passages clogged by gunk. Release deposit and allowing the oil to flow freely. Saves wear and tear on the engine.

KEY FEATURES

• Non- solvent base detergent to remove oil sludge and gunk with detergent method


• Dispersant to disperse the oil sludge from oil sum and engine corners


• Lubrication to protect the surface while cleaning

USAGE GUIDE

Before changing the used motor oil and the oil filter, add KM+ Engine Flush into the motor oil and allow the engine to run at nomal idle speed for 5minutes and rev the engine up to 3000 rpm for 30 seconds and let it idle for 10 minutes and rev the engine up to 3000 rpm for 30 seconds.

Then stop the engine and drain the crankcase. Replace the filter and refill the crankcase with fresh oil.

Best way to compare the Flush - Add 1 bottle of KM+ Advanced Engine Flush into the engine before you change engine oil and then drive a few kilometers. You will feel the difference in your car performance !