The marine environment is unforgiving so we created System X Xtreme – our premiere spray-applied marine coating. The high corrosiveness of salt, UV rays, acids, alkalies, exhaust and algae/shell contaminants can cause structural and cosmetic damage that impair your craft’s performance and ruin its appearance. Harnessing the most durable ceramic technology available, Xtreme is our best performer against friction, heat, and solvents. Able to withstand heat over 1000 degrees, Xtreme is highly mar resistant, and needs to be applied in a controlled environment with a 24-hour dry time.
The extreme gloss finish will not yellow, crack, peel or delaminate through years. Upon application you can have the utmost confidence that your vessels will be rendered virtually immune to the adverse weathering effects of both underwater and above-water environments, conditions, and elements. For the ultimate marine protection, look no further.
Technical Data
Effectiveness
Up to 2 years in most marine applications
Pencil Hardness
9H
Application
HVLP touch up gun with 0.8mm tip
Bottle Size
275 ml, 4L, 20L
Shelf Life
1 years from shipment date when unopened and stored dry at 18°C (64°F) to 23°C (73°F)
Appearance
Clear / High Gloss
Film Thickness
.5 - .7 mil
Chem. Resistance
Outstanding
Temp. Resistance
>538° (1000°F)
Salt Spray
(ASTM B117) @ 35°C (95°F), 5% Salt Concetration, 400 hrs to first signs of corrosion
Adhesion Cross-Cut Tape
(ASTM D3359) 5b (0%, None)
Mandrel Bend
(ASTM D522) 0% @ 180° Rotation
Impact
(ASTM D2794) 80/80 in/lbs
Coverage
36 sq feet (3.34451 sq meters) per 100ml
Dry Time
40 Minutes
Cure Time
Initial cure in 4 hours, full cure in 3 days
Applications
Company Profile
Element 119's origin began in Connecticut back in 2010 as a specialty coating R&D company specializing in the aerospace industry. Coatings were developed for the likes of Sikorsky, Bombardier, as well as predominant airlines internationally.
Clients of this caliber demanded cutting edge innovations for the unique challenges they faced, which we were sure to deliver. One of these challenges was Sikorsky's requirement for an easy to clean, hand applied coating to protect paintwork around helicopter exhaust ports. All other solutions would melt off during the first flight, leaving the paint to become fouled by the exhaust.
We were asked to create a coating that would withstand temps in excess of 1000 degrees, while adding gloss and long term protection in the harshest environments. System X was developed for this purpose, and performed well beyond expectations.
Seven+ years and billions of dollars in protected vehicles later Element 119 is now represented in 20 countries and counting. We owe our success to our close relationships with System X distribution and installation partners. We remain true to our mission, focused on delivering the best, most efficient, longest lasting coating technology on the planet. All of our ceramic coatings are manufactured at our facility in Thomaston, CT USA to the absolute highest quality standards.
