Share on (60033871356):

insulation nail expantion nail shooting fastener split insulating nail insulation pin Aircraft expansion plug

heat insulation pin galvanized steel nail insulation fixing pins
Aluminum insulating nail is made of iron sheet and aluminium wire, It is used to fix the insulating layer on the insulating body,The length of the insulating nail is selected according to the thickness of the insulating layer,It needs to be used with special glue for insulating nail,It is mainly used for fixing glass wool and rock wool.
insulation fixing specification:
Item No. | Size(mm) | Pin Diameter (mm) | Pin Length (mm) | Washers |
No.1 | 25*25 | 1.70 | From 20mm to 300 mm are standard. | Self - locking washers are available in a variety of sizes, Shapes. and materials. |
No.2 | 35*35 | 2.67&3.00 | ||
No.3 | 50*50 |
Recommended assembly method :
1.Work surfaces should be clean and dry, free of dust, grease, oil and any other loose matter.
2.Remove the protective release paper taking care not to touch the adhesive.
3.Place the hanger in the required position and press the base against the surface to be insulated
4.Insulation can be impaled immediately and firmly locked with fastening clips but maximum strength of adherence is achieved after 24 hours
Pin cover :
Protect people hand from being injured when putting insulation.
insulation fixing thermal insulation pins usage :
Exclusively used for fixing adiabatic materials in ducts of air-conditioner, for glass-wool and rock-wool in soundproofing works, and for the duct-lining


If you have any question , please feel free to contact us! I will be here for you.

New products from manufacturers at wholesale prices