12V /24V Wireless Transmission Module for Car Rear View Wireless Camera Module
Product Description
Content:
1. TX module x 1 PC
2. RX module x 1 PC
3. English User Manual x 1 PC
Features:
1. Video transmission by Frequency Modulation over DC Power in Vehicle,
2. Users don’t have to install one more video cable from camera to display monitor. This device can shorten the installation effort and time, economize the use of the video cable material.
3. Video quality is good, almost no loss which compared with original camera video output.
4. Video signal is more stable than 2.4G wireless video transmission video signal, because there is no RF interference.
5. Many Rx modules can connect to one Tx module. Every Rx module will receive the same quality video.
6. Suitable for all vehicles which use 12V DC or 24V DC.
7. Video signal will quickly response when a vehicle turns to reverse gear.
8. This module supports one 12V output for power supply to a reverse camera. Users don’t need to buy the
24V special used camera.
9. Waterproof and anti-vibration for this product.
Specifications:
Description
TX
Module
1. Blue / Black Doubling Wire (30 cm) ----------- DC 12V (200mA) Output to Reversing Camera.
2. Red / Black Doubling Wire (30 cm) ----------- DC 12V / 24V Power Input.
3. Yellow RCA Jack Male On Wire (30 cm) ----- Video Input (From Reversing Camera or
Any Video Output Device).
RX
Module
1. Green Wire (30 cm) ------ Trigger Wire To Notify Monitor If Video Signal Works Or Not.
2. Red / Black Doubling Wire (30 cm) ----- DC 12V / 24V Power Input.
3. Yellow RCA Jack Female On Wire (30 cm) ------------- Video Output to The Monitor.
