Product name :PIR led flood lighting Model No.:SW-FL003-W50-PIR
Main Point:
Input voltage:AC100-240V/ DC12V / DC24V
Led chip: Bridgelux fm USA
LED Lumen:100-110Lm/W
IP grade:IP65
Beam angle: 60 or 120degree
Shell color: black or grey
Working life:>50000hours
Technical datas of 50w pir led flood lights:
No. :
Specifications :
1
LED Type
PIR led flood light
2
Power
50W / 5000LM
3
Type
PIR Motion Sensor
4
Voltage
100V-240V AC
5
Color available
Warm White ,Nauture White and Cold White
6
Detection Distance(Adjustable) :
4 ~12m (<24)
7
Time Delay(Adjustable ):
10 sec to 7min(+/- 5%)
8
Light Control( Adjustable):
3-3000LUX
9
Detection Motion Speed
0.6~1.5m/s
10
Beam Angle
120 degree
11
Dimension
L:290mm * W:235mm*H:150mm
12
Color of Housing
Black or Grey Housing
13
CRI
> 70-80Ra
14
Material
Die-cast aluminum+toughened glass
15
IP Grade
IP65
16
Working Frequency
50 ~ 60HZ
17
Working Temperature
-40 degree ~ 60 degree
18
LED Life
> 50000 hours
19
Certificate
CE.ROHS
Lamp size of this pir led floodlights:
Products features of this 50w led floodlight with pir sensor :
1. Mercury-free, lead-free and energy efficient illuminant, environmentally friendly lamp
2. Die cast aluminum radiator with the maximum interface with air ensures excellent heat dissipation function; the strong and the compact structure protect the whole lamp.
3. Anodized aluminum reflector keeps the even and efficient lighting effect. Coordinating with the radiator, it contributes to a cooling system to ensure safe performance for long hour working request.
4. High power led illuminant provides comfortable light without radiation, strobe flash or UV.
5. Aluminum PCB with silicone may keep it dustproof ,dampproof and anti-oxidation;
6. Die cast aluminum ballast casting with powder coated finish may keep it corrosion-resistance.
7. Varieties of colors such as white, green, blue, yellow, red, etc. are available.
Directions for installation:
Fix the light on the pole or the mounting surface by screw though the holes(¢10mm) of the installing support.
After the light being fastened,the screws 1A and 1B could be loosen,and then change the angle of the installing support so that the installation angle of the light would be adjusted
Keep the light in suitable operation and storage temperature.
In order to avoid the electrocution the interface between the wires could be fully-closed when fixing the light.
The corresponding measures could be take for waterproofing and avoiding leak when the external power supply line is used.
Any correlative laws should be observed in use.
Light should be fixed by the professional electrician with the three-core(0.75MM2) mode of connection: red wire (live line) blue wire (neutral) and the earth wire.
