Sealing Gasket Shellac,Gasket Sealant Adhesive 59ML

Product Overview

Description

Specifications

1.Head gasket shellac 
2.59ml 
3.Fast drying,hard setting 
4.Resist most petroleum products and shop fluid 
5.High quality 

Descriptions and Features:

 

Synid Gasket Shellac Compound is a hard setting, slow drying liquid designed to coat, seal and repair most gaskets including felt,paper,rubber and composition type gaskets. It seals metal gaskets and threaded connections for light duty service. synid Gasket

 

shellac have three color: dark bown ,gold yellow, grey, red brown color.

 

 

1. Flexible when dry

 

2. Good fuel resistance

 

3. Improves reliability

 

4. Saves time and labor

 

5. Increase sealing reliability

 

6. Applies easily

 

7. Cleans up fast

 

8. Temperature Range - 65 °F to + 350°F

 

Typical Applications:

Automobile cylinder bed

Conventional seal

 

Technical Data Sheet:

 

Odor	Alcohol
Boiling Point	180°F
PH	none
Solubility in Water	Partial
Specific Gravity	1.1
VOC(Wt.%)	32%
Vapor Pressure	33 mm Hg @ 68°F
Vapor Density (Air=1)	2.07
Evaporation Rate	7.7 (ether = 1)

 

 

 

HOW TO USE

Application Temperature, °C(°F): +5~+45 (+41~+113)

 

1. 1.        Apply with brush or roller on dry, clean surfaces, free from dirt, oil, rust and dried paints or sealants.

When brushed on gaskets, they should be dry.

1. 1.        The recommended thickness of the film depends on the type of surface. Generally, the wet film should be applied thin (approximately 0.010”) and uniform.
2. 2.        For bonding gaskets, apply on both surfaces. Allow to dry until surfaces are dry to the touch.

 

 

Chemical / Solvent Resistance

The product retains effective properties in contact with automotive fluids, such as motor oil, transmission fluids, alcohol and antifreeze solutions.