High Quality Perfect Perf , Perforating Rule For Offset Press TPI 401 (60124421278)

Share on:


Price:
Price in USD:Details

Quantity:


Product Overview

Description


 



Product Description


carrier roller            rubber roller with high quality




Perforating Cutting Rules


Stainless Steel For Die Makers


 


 


 


INSTRUCTIONS FOR APPLYING PERFECT PERF
NOTE:It is recommended that a good perforation guide be included in the printing plate.
STEP 1:  Make certain that the impression cylinder is clean and free from oil or grease.
STEP 2:  After positioning image on sheet,transfer image to the impression cylinder.
STEP 3:  Cut off the amount of Perfect Perf to rule required and remove the paper backing to expose the adhesive coating.
STEP 4:  Following the guideline ,apply the Perfect Perf to the impression cylinder .Once applied the adhesive wll hold the rude in position.
STEP 5:  Overlay the rule with the clear film tape furnishined in the spool.On the first impression the sutting or scoring adge will puncture through the tape.
Note:      After securing the rule to the cylinder ,it is advisable to reduce the pressure between the impression cylinder and gradually increase until the desired printing and perfrating results are acquired . By increasing the cyclinder pressure it will naturally improve the perforation but could affect the print quality.Therefore depending on the thickness of stock being used it may be necessary to adjust the rule height by building up the rule as suggested below.


 


TROUBLE-SHOOTING HINTS
If the cut is considered too light, apiece of clear film tape should be applied underneath the rule to adjust the height.Be certain to trim away any extra tape .
If the sheet will not release from the rule or if the cut is considered too heavy,another piece of clear film tape should be applied over the rule.



CAUTION:  BEFORE TURNING ON THE PRESS MAKE CERTAIN THERE IS CLEARANCE BETEEN PRESS PARTS AND THE APPLIED METAL RULE.
EASY INSTRUCTIONS FOR REPEAT JOBS



Prepare the job for running the ordinary procedure.
STEP 1:      Apply Perfect Perf to printed sheet or thin plastic sheet using the perforation guideline.
STEP 2:      Place the sheet in the press feeder and open the sheet detectors wide enough to allow passage of the metal rule.
STEP 3:     Coat the impression cylinder area behind the grippers with a generous amount of rubber ce  ment. Apply a thinner coat of rubber cement on the impression cylinder over the area the sheet will cover.
STEP 4:     Slowly feed the sheet through the press.As it enters the grippers turn off the press and continue the cycle by hand.
STEP 5:     Cut the sheet directly behind the grippers with a sharp blade.The sheet will now stay fastened to the cylinder.Using rubber cement fasten any loose edges or corners.
STEP 6:     Adjust pressure to allow for the extra sheet and your job is now ready to tun.If aplastic sheet is used it can be remored and again.


 


1_.jpg


4.jpg


 



 


_.jpg3.jpg



Packaging & Shipping


 


 


Payment: T/T, Westen Union, Paypal, Money Gram


 


Shipping: TNT, FEDEX, DHL, UPS, EMS...


 


_.jpg


 


.jpg 





company information


Our Company always taking the aim of “surviving on high quality and seeking development with prestige”, will offer the best service to customers at home and abroad wholeheartedly.


We have our own factory with professional Research and Development Department to producting products . And our product enjoy good quality and reputation,which very well sell in local market.Besides, Our engineers have over 16-year experience on printing .


 


658825677128275582.jpg


 


898896624273063482.jpg 


 





In Exhibition


139040557072094928.jpg


 


     658825677128275582.jpg 





Our Services


 


 



We wholesale and retail printing inks, PS plate, blanket, pressroom chemicals, and


all kinds of import and domestic brand printing materials, over one thousand 


models and specifications for your option.your inquiries are welcome!


 


8.jpg


 


 


750.jpg


 


 


 






FAQ


 


1. What is your best price ?


   The price is depend on your quantities , If you quantities is big ,  you can contact me for a discount .


 


2. I am a reseller and would like to place a big order ,what's the wholesale price?


   If you want to resell our products , please contact us for a further discuss , will give you a wholesale price .


 


3. The ink shipping is a bit expensive , can i choose another cheaper express ?


   Due to the ink is chemical liquid , only Fedex can ship it , about 3-4 workdays will arrived .


 


4. What is the normal lead time ?


   We have our own factory and engineer, will send goods to you about 2-3 workdays after payment confirm .


 


 


 




 


60124421278
0.019 s.