Shandong huiyuan top quality Muti colour and attractive self adhesive membrane

SELF ADHESIVE BITUMEN FLASHING TAPE 

 

PRODUCT DESCRIPTION 

 

A self - adhesive sealing tape recommended for all substrate seling repairs on asphalt, bituminous sheets, glass, metal, plastics, timber, mortar, concrete, bricks, rooftiles, stone. Seal guttering, downpipes, roof sheets or flashings. Seal cracked brickwork, concrete, tiles or glass. Seal carport or verandah rollf to main wall. Seal window frames.

 

PACKAGING & SHIPPING 

 

 

Available in rolls

 

50 mm x 10m

 

75 mm x 10m

 

100 mm x 10m

 

150 mm x 10m

 

200 mm x 10m

 

225 mm x 10m

 

250 mm x 10m

 

300 mm x 10m 

 

also 2.5 m,3.0 m, 5.0 m,1 0m,20 m length is availbale

 

 TYPICAL  USES  

 

 

* Replacement or repair of flashing     
* Guttering, down pipes, skylights
* Extensions, porches, window frames 

 

& chimneys, jointing for artificial grass 
* Caravans & Conservatories
* Sealing parapets, valley gutters
* Seals capping bolts & roof ridges
* Roof repair of portable buildings

 

TECHNICAL INFORMATION

 

 

 

 

 

Composite laminate of:

 

 

 

An aluminum foil carrier

 

A self adhesive bitumen modified compound and,

 

A silicone coated release interleave.(removed during application)

 

 

 

Thickness                             1.0mm, 1.2mm, 1.4mm,1.5mm,2.0mm

 

Temperature range           -20 degree / 90 degree

 

Application Temperature       5 degree

 

Shelflife                                maximum 2 years

 

  Application guidance  

 

 

 

 

 

 Ensure that the surface is dry and free from dust, rust and loose materials.

 

 Prime porous surface e.g. concrete and brick with a bitumen primer or black, bitumen paint, thinned with white spirit, which is allowed to dry.

 

Cut the flashing tape to the required length.

 

 

 

Peel back 5cm (approx) of the release backing paper and position carefully. Continue removing the backing paper whilst firmly placing the tape to avoid unnecessary creasing.

 

Smooth down so that the overall contact is complete, and ensure that all air bubbles are removed. Take care not to damage the surface of the tape.

 

Where tape is joined, ensure that there is an overlap of at least 1inch or 2.5cm.

 

After use release pack and store upright in cool and dry conditions.