LM Guide Actuator robotic arm laser 3d cutting robot arm
- Category: >>>
- Supplier: Zhejiang Sikete Technology Co. Ltd.
Share on (60165970988):
Product Overview
Description
LM Guide Actuator robotic arm laser 3d cutting robot arm
Only normative of the company can make satisfactory products.
ZheJiang Sikete Technology Co.Ltd provide the best service for you.
Product Description
Feature:
- Used in the general environment. Easy for system design, installation and maintenance
- Fast speed; competitive price; short delivery time.
- Compact and lightweight
- High accuracy.
- High stiffness Well equipped with required accessories
- Can locate more and more control
- Product diversification, easy to choose collocation, and can be tailored special customized products.
Technology of JA150
Technology Parameter> > >
Combination Styles Of Robots > > > >
Motor Installation Way Of The Ball Screw Robots> > >
Motor Installation Way Of The Synchronous Belt Robots > > >
Attention > > > >
Attention when working
1.Origin and travel inductive switch
a.Standard robot’s inductive contains origin, plus limit switch and minus limit switch, the
origin of default is close to motor side.
b.It must manually check the origin and travel switch’s working state before electricity connected firstly.
c.It should firstly check motor’s speed set up in the range of low speed before electricity connected.
d.Sensor specification (three wires):brown:24+ blue:0V black:signal wire
2.The allowable torque of static and dynamic
a.The allowable torque of static is the allowable torque of X-Y-Z three axis when robot is in sleeping condition.
b.The allowable of torque of dynamic is the allowable torque of X-Y-Z three axis when robot is in working condition.
3.The definition of torque’s direction
4.Working life
a.The robot’s life is the total working time before its failure when it had worked in permitted load condition.
b.Notes:it must guarantee the load should be in the range of robot’s permitted load, and moving Parts should be lubricated enough, and the working condition is good.
5.Protection in vertical load condition
a.When working in vertical condition, it must consider the potential danger caused by sudden load drop in power failure condition, so It has to design the protection device of power failure to robot.
b.When working in vertical condition, It must consider the influence of its own weight to driving load.
6.Body accuracy
a.The flatness of robot’s bottom surfaces in horizontal and vertical are ±0.02mm/300mm Max.
b.It should guarantee the flatness of the surface for installation is ±0.05mm/M Max.
Product picture
Packaging & Shipping
Industrial exporting packing,or upon the customer's request. We offer as many shipping options as possible, including DHL, UPS, TNT, FEDEX and EMS, Airfreight and by Sea.
Our Services
About process
We can offer end machining, this is one standard end machining drawing, if you have special requirement, please offer us drawing. There will be additional end machining cost.
About quality
Quality is the life . We use only the best quality material to ensure the standard of our product range is of the highest caliber. All products we sold out are strictly selected and tested by our QC department.
About payment
We accept payment via TT (Bank transfer), Paypal and Western Union. We accept bank transfer for large orders. For small order, you'd better pay via Paypal,Western union.
About shipping
We offer as many shipping options as possible, including DHL, UPS, TNT, FEDEX and EMS, Airfreight and by Sea.
Company Information
Company Profile:
ZheJIang Sikete Tchnology Co,.Ltd. Is an integrated enterprise intergrating the research and development,mannufucturing and trade,mainly engaged in ball screw and nuts. Also,our company is specialized in manufacturing and selling linear bearings, rod end bearings, linear motion sliding units, linear guides,and shafts ect. The specifications of the products are well-found, the quality is good, and the price is shorten the delivery date, improve the inventory management, our company strcitly implement of ISO9001:2008 quality mangement system,taking the effective management as an important step in the enterprise development.
workshop:
Exhibition:
Add: ZHEJIANG LISHUI SHUIGE INDURSTRY HUIMINGJIE 5,China(mainland)
Tel:86-0578-2620855,2620866,2620877
Fax:86-0578-269216
Website ://www.zjskt-global.com
FAQ
1.Q: Are you the factory direct sale? Can be customized according to our requirements? The goods time how long?
A: 100% direct manufacturers, we are welcome you visit our factory. Because every client need different length size, load and speed demand is different also, so we are to make to order according to the requirements of you, part of the length of a spot (please contact the owner consultation). Because our products are most of the spare parts for imported parts, so the goods time generally ranging from 3 to 15 working days, the concrete can ask the owner.
2.Q: Your product quality is guaranteed?
A: Absolute guarantee product quality . According to the industry standard warranty for a year, a year non-artificial factors damage, free maintenance .
3.Q: Can you help me to design ?
A: As long as you need, we will design the most reasonable solution for you free of charge .
4.Q: After I bought your product, how should maintain? Have specific instructions ?
A: We can provide you with the electronic file maintenance instructions, also can read the content to get to know our products .
Inquiry Detailed
Single-axis or multi-axis |
|
| Width | |
| travel of each axis | |
| Max. Speed | |
| Max .Payload and repeatability positioning accuracy | |
| Comebination Styles of Robot | |
| Motor Installation Way of The Robot arm | |
| any requirements for installation |
Remarks: Could you tell us the above data? So that we can provide you with best service.
We hope to have the opportunity to cooperation with you and any further enquiry will receive our prompt attention.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
