Circular loom knitting fire hose machine with CE standard (60184634677)

Share on:


Price:$5,000.00
Price in USD:Details

Quantity:


Product Overview

Description


 



Product Description


 Circular loom


Circular Loom is a kind of hose loom which is optimized and developed on the basis of introducing foreign similar equipment and combining with our own experience summarizing from long-term production practice as well.


1,The host regulates speed by variable frequency. It is convenient and flexible for operation, high


security, reliability and high efficiency.


2, Equipped with automatic stop controls breakage of warp yarn and empty weft bobbins and the indication lights show where the breakage has occurred or if the weft bobbins are empty. This makes the products quality stable and reduces operators’ work .


3, Surface of the fabric is even and equal. More than 4 patterns of weave are available .              


4,Hose diameter is from 20mm to 110mm and 250mm can be reached by adding accessories .     


5,Compact structure and cover smaller area .


II Main Technical Parameters


1)Shuttle speed : 204 rotation/min (Max);   2)Motor: 5.5KW;   3)Control power : 220V   AC 24V DC 4)Available weave diameter :20mm—110mm;    5)Available number of warp ends:478 single or double ends;    6)Time of automatic stop : approx. 2/3 rotation


III Installation 


We recommend that the Circular Loom should be installed on a 10m2 platform of net height approx. 2500mm. By doing this the equal warp tension is obtained easily and site area of each Loom can be reduced. But it is not objected that installing the Circular Loom on the same level as the creel . the Loom is required to be horizontally.


IV Adjustment and operation


1,Adjustment: All parts of the Circular Loom have been tested and adjusted when leaving the factory. Customers can use it directly under normal circumstances except the shuttle gap need certain adjustments during operations, details as following :                                                     


a) Dismantle of shuttle-tang and adjust bolts of bracket 634/3                                       


b) Loosen 613/3 stop screws of eccentric axis of shuttle stop idler                                     


c) Turn eccentric axis with Hex allen wrench and adjust lengthways gap of shuttles to the best state       


d) Fasten stop screws                                                                             


2, Thread: Distributing hose warp yarn which you design to centre of 12 units ,i.e. 478 guiding needles and shuttle bed evenly .plain weave intervals two levels or multiple of two, twill weave intervals three levels or multiple of three. It needn’t interval if the warp yarn design is 478 pcs . Detailes in <table 2> and <table 3>.                                                                               


3,Traction :lead along the warp yarn upon spring hook and stuck the spring hook in the mouth of warp-stop boardcard ; clamp warp-stop board ; distribute warp yarn into four to six shares and tie to the prepared traction head , details in <table 2>. Note: Wave circular has been installed . Drive the clutch off the traction equipment and force the shaking arm fan-shaped gear to occlude with fan-shaped gear of pan axle , Turn handwheel anticlockwise to tighten lead and warp yarn ,exit handwheel axis and pull off clutch and making it occlude with pan axle.                                                              


4, Adjustment of fan-shaped board t: Fix the fan-shaped board on shuttle-tang and make adjustment by adjusting screw of shuttle-tang.Turn adjusting screw of shuttle-tang when adjusting and it is suitable to adjust fan-shaped board to the internal edge of waive circular.                                          


5, Adjustment of weft density : According to the weft density of your designed products, exchange the weft gear(E) to the one meeting requirements ,details in <table 1>                                 


6,weave by installing weft bobbins: put the weft bobbins finished according to requirements into shuttles . Note: the weft bobbins should be put the correct place. Insert the weft into the thread hole of fan-shaped board and adjust the head of shuttles. Press the button after confirmation and make the machine turn slowly ,so that hose will be weaved .                                                        


7,Adjustment of weave diameter : After forming fabrics, if there is tolerance between the diameter of fabric and the required, corresponding adjustments can be made,i.e. turning adjusting screws after loosening locking nuts of shuttle-tang and adjust corresponding position of fan-shaped board and weave circular ,i.e. daff or furl until satisfaction.                                                                       


8,Adjustment of distribution disk : the distribution disk must cooperate with guiding needle correctly, otherwise,normal weave is not available. When finding the position is not correct, adjust the distribution disk forward or backward one case of guiding needle after loosening bolts of distribution disk bracket , then normal weave is available . 


DSC01346.JPGDSC01356.JPGDSC01277.JPGDSC01276.JPGAccessories 2.JPGAccessories 1.JPG




 



Our Services


 


Our circular loom has got CE approval. We adopted Norway Mandel's technology to manufacture this loom. At moment, there are more than 80units in our factory and all works well for many years. If you are interested, contact me.




 



Packaging & Shipping


 


Packaging Detail: Wooden case
Delivery Detail: 30days


 


DSCF2311.jpg


DSCF2316.jpg





Company Information


 


We are specialized in manufacturing all kinds of fire hose,hose couplings,nozzles, Circular Loom , Extruders and a complete set of hose vulcanization equipment.


We have quality certification ISO9001-2000 and CE mark, and products are manufactured strictly according to the standards to guarantee factory products 100% eligible.


We insist one principle : credit-based, quality first,Continuously innovate


We promise that we will offer satisfied service for all consumers.


We wish to extend our warm welcome to our customers no matter new or old, home or abroad for good cooperation and mutual development. 





 


 


 



FAQ


 we are one loom manufacture in china. 


 




 


 



Certifications


 


CE CERTIFICATE FOR LOOM.jpg




 


 


 


60184634677
0.0486 s.