steel structure warehouse prefabricated strong design (60200082651)

Share on (60200082651):


Price:$60.00 - $80.00
Price in USD:Details

Quantity:


Product Overview

Description



PRODUCT DESCRIPTION






ZM Type Workshop Housing Products
① Good corrosion resistance: the structure is galvanized, greatly improving the moisture-proof and anti-corrosion performance;
② Short construction period: mechanized batch production can be carried out with short processing cycle; Full bolt assembly and connection can be realized, with short installation cycle;
③ Low cost: low amount of structural steel, light deadweight, low requirements for foundation, and bulk packing, greatly saving the number of boxes.
Note: ZM type houses can be used not only as workshops and warehouses, but also as large offices and restaurants after improvement






PRODUCT PARAMETERS


Product specification
Length
Can be customized according to need
width
≤18000mm
height
Eaves height≤7000mm
Roof form
Double slope, roof slope 1:5
storey
single storey only
Design Parameters
(standard)
roof dead load
0.3KN/㎡
roof live load
0.5KN/㎡
(snow load)
wind load
0.45KN/㎡
anti-seismic
8 degrees
Recommended function
mainly used for warehouse, factory, dining hall, big office, etc.
structure
Column
2-M300 profile steel T=3.0mm, material Q345
Beam
2-M300 profile steel, T=3.0mm, material Q345
Maintain Article
C170 profile steel, T=2.0mm, material Q345
painting
all structure is hot dip galvanized, galvanization coating is 120g/m²
roof
Material
colour steel sandwich panel
According to the functional characteristics, colour steel veneer can be used
Insulation
Polystyrene, fire rating B2
Glass wool, fire rated A grade
wall
Material
colour steel sandwich panel
According to the functional characteristics, colour steel veneer can be used
Insulation
Polystyrene, fire rating B2
Glass wool, fire rated A grade
/
door
size
According to the need to determine the door size
Material
For office: laminated wood door or aluminium alloy door
For warehouse: sandwich panel sliding door, electric lifting door, etc
window
size
Size can be determined according to function
Frame material
Standard: Steel
Matching: aluminium alloy, broken bridge aluminium alloy
glass
standard: single glass
Matching: hollow window
ceiling
common room
Standard: waterproof gypsum board
Optional: Calcium silicate board, mineral wool sound-absorbing board, aluminium buckle board *Prepared according to function and
climate
water room
PVC, Aluminium composite panel
floor
common room
Floor tiles, wood floors (according to the function)
water room
anti-sliding floor tiles
electricity
we can offer the scheme/designing/construction technique services
socket
multifunctional socket(250V/10A)
three flat pins socket (250V/16A)
Can be equipped with European, American, and Australian standards according to demand
Cables
BV-1.5mm² / BV-2.5mm² / BV-4mm²
Voltage
220/380V
breaker
High segmentation miniature circuit breaker
water
we can offer the scheme/designing/construction technique services
water supply
PPR
drainage system
UPVC


ZM Product Installation Process


1.Fixing Of Skeleton And Wallboard
2.Install Wall Purlin
3.Route Cable


4.Installation Of Roof Truss Beam
5.Installation Of Purlins
6.Installation Of Integral Roof Truss


LAYOUT


Clinic Layout
Warehouse Layout


Layout Of Two Span Workshop
Restaurant Layout


PROJECT CASES




Project Introduction
This project is a dairy product and beverage factory jointly built with Ningbo Dairy Group to improve the local diet and living standard in Nigeria;The total area of the house is more than 20000 square meters;The contract amount is more than 2 million dollars.


   Afgan Peace Keeping Project

Algeria Mosque Construction Project



Chad Pipeline Construction Project

Gabon Accommodation Project

Namibia Rod Construction Project



Pakistan Broadcasting Station Project

Peace Keeping In Liberia



PNG Bridge Construction Project

PNG Refining Project

Qatar Harbor Construction Project



Russia Petroleum Project

Russia Mining Camp Project



FACTORY PRODUCTION


VR


Factory Workshop Display








CERTIFICATIONS






\t\t\t\t\t\t\t\t\tFAQ \t\t\t\t\t\t\t


Q1. What is the maximum size of the room?
A: The maximum span of this house type is 18 meters. There is no specific limit on the total length of the house. It is
recommended that it should not exceed 100 meters, and the eaves height can be up to 7 meters.

Q2. Can the room be spanned?
A: It can be connected. However, when working in offices and restaurants, it is not recommended to cross because of the drainage problem at the cross section.

Q3. What is the thickness of the wall top plate? What is insulation?
A:The wall top plate can be color steel veneer (the minimum thickness of the top plate is 0.5mm/the minimum thickness of the wall plate is 0.4mm) or color steel composite plate (the normal thickness is 50, 75, 100mm). The thermal insulation layer is polystyrene and glass wool, and rock wool is too heavy to be used.

Q4. Can this kind of house be disassembled repeatedly? What is the loss rate?
A:It is not recommended to disassemble and assemble the enclosure materials repeatedly, which will result in a damage rate of 20%~30%. The molded parts of enclosure materials need to be replaced. The structure can be disassembled and used repeatedly.

Q5. How long is the service life of the house?
A: The general service life of the house type is 10-15 years.

Q6. How is this house packaged and transported?
A:Usually, large pieces are transported by container liner. The large materials of the room will be put into the container in
nude, and the small parts such as hardware and electricity will be put into the wooden box. If there are sanitary wares, they will also be packed in wooden boxes.

Q7. Can it be used as the second floor?
A: This room type can be used as part of the second floor, because the distance between columns on the first floor is very small, so it is not suitable for the second floor cargo platform of large warehouses.

Q8. What is the installation speed of this room type?
A: Because of all bolted connections, 8 people can complete the installation of 1000 square meters of this room in 14 days.

Q9. How about the wind pressure and earthquake resistance of the house?
A: It can withstand the wind pressure of 0.5KN/M2 (28m/s or 101KM/H) and withstand a strong earthquake of magnitude 7.



0.0138 s.