Self-adhesive bituminous waterproofing tape protected with aluminum film,strong adhesive power makes it ideal for sealing,waterproofing and protecting any surface.balanced mix of sevreal synthetic rubbers and bitumen provides a permanent bonding on serveral materials such as concrete, stone and metals. the tape is very flexible and it adheres directly on dry and flat substrates.
Packaging & Shipping
PACKAGING & SHIPPING
Available in rolls
50 mm x 10m
75 mm x 10m
100 mm x 10m
150 mm x 10m
200 mm x 10m
225 mm x 10m
250 mm x 10m
300 mm x 10m
also 2.5 m,3.0 m, 5.0 m,1 0m,20 m length is availbale
TYPICAL USES
*Replacement or repair of flashing * Guttering, down pipes, skylights * Extensions, porches, window frames
& chimneys, jointing for artificial grass * Caravans & Conservatories * Sealing parapets, valley gutters * Seals capping bolts & roof ridges * Roof repair of portable buildings
TECHNICAL INFORMATION
Composite laminate of:
An aluminum foil carrier
A self adhesive bitumen modified compound and,
A silicone coated release interleave.(removed during application)
Thickness 1.0mm, 1.2mm, 1.4mm,1.5mm,2.0mm
Temperature range -20 degree / 90 degree
Application Temperature 5 degree
Shelflife maximum 2 years
Application guidance
Ensure that the surface is dry and free from dust, rust and loose materials.
Prime porous surface e.g. concrete and brick with a bitumen primer or black, bitumen paint, thinned with white spirit, which is allowed to dry.
Cut the flashing tape to the required length.
Peel back 5cm (approx) of the release backing paper and position carefully. Continue removing the backing paper whilst firmly placing the tape to avoid unnecessary creasing.
Smooth down so that the overall contact is complete, and ensure that all air bubbles are removed. Take care not to damage the surface of the tape.
Where tape is joined, ensure that there is an overlap of at least 1inch or 2.5cm.
After use release pack and store upright in cool and dry conditions.
