cargo transportation usage longer hiace model panel vans for sale

Product Overview

Description

 

Short description of the "cargo transportation usage longer hiace model panel vans for sale":

1. 4.92 meters long, 2225 meters high

2. three (3) roofs are available: flat roof, semi high roof and high roof
3. 2-5 comfortable fabric seats
4. both 491Q-ME EFI gasoline engine and turbocharged diesel engine also available
5. it is also available with lengthened body with lengthened wheelbase from 2600mm upto 2900, will create more spacious and comfortable sitting feeling with a 15 seats van

6. this model hiace van can be usually used as a public transportation mini bus for both passengers and cargo (without the rear row seats) in the African countries, espeically you can see in Nigeria and Ghana, the yellow mini bus, old and broken, which can be replaced by this new hiace vans, a good chance !!!

 

 

cargo transportation usage longer hiace model panel vans for sale

 

 

Description of the "cargo transportation usage longer hiace model panel vans for sale"

 

hiace cargo van (panel vans for sale)
Model			6480 Series Diesel Hiace Van
Seating Capacity (persons)			2-5 seats
Fuel Type			Diesel
Quotation (FOB, CBU, 3 different  roofs with standard face and  standard wheel base-4.92m)		1930 (standard -flat roof)	US$0.00
		2050 (semi-high roof)	US$0.00
		2225 (high roof)	US$0.00
Engine	Engine Model		BJ493ZQ (standard, with turbocharge, same as 4JB1T)
	Engine Type		Vertical, in-line, forced water cooling, pressure charging, four strokes, direct injection combustion chambe
	Displacement		2.771L
	Max Power		68/3600 (hp/rpm)
	Max. Torque		202/≤2300 (N.m/rpm)
	Fuel Consumption (L/100km)		6.98
	Fuel Tank Volume (L)		70
	Compression ratio		18.2:1
	Emission Standard		Euro II
chassis	Wheel Base	2600mm (standard wheel base) / 2900mm (lengthened wheel base)
	Front Tread /Rear Tread		1430/1430 (mm)
	Minimum Ground Clearance		165 mm
	Braking System	Hydraulic braking system with vacuum booster, front disc & rear drum
	Suspension System	Front: Independent suspension by double beams with torsion bar spring; Rear: Leaf Springs
Finished Automobile	L*W*H (mm)	standard face & standard wheel base	4920*1850*1930/2050/2225
		new face & standard wheel base	5050*1850*1930/2050/2225
		standard face & lengthened wheel base	5250*1850*1930/2050/2225
		new face & lengthened wheel base	5350*1850*1930/2050/2225
	Curb vehicle weight (kg)		1620
	Gross vehicle weight (kg)		2420
	Max. Gradability (%)		≥32
	Steering		Rack and Pinion
	Gear Box		5 speed manual
	Tyre specification		185R14C
	Clutch Type	Single plate, dry type diaphragm spring with tensional vibration damper

 

 

Detailed Pictures of this model "cargo transportation usage longer hiace model panel vans for sale":

 

 

 

 

 

 

 

 

Packing: nude to be fixed in the container by rope (2 units "panel vans for sale" can be loaded in a 40feet container), or the "panel vans for sale" in nude to be fixed and shipped by RORO if the destionation port can handle the RORO shipment, which will be much cheaper than by container:

 

 

 

 

Our company is focusing on the overseas vehicle assembly project, including pickup, SUV, van, bus, and mini moke, etc., why this project can succeed? or what will you get from this project?

1) save customs duty, this is one of the most important factors, usually, in most of the countries, the customs duty rate for the KD parts (knocked down auto parts) is much less than the rate for the complete vehicle, the government wants to protect or develop their own industry, for example, in Nigeria, the tax rate on CBU (complete vehicle) is 35%, while only 5% for SKD, and zero percentage (0%) for CKD, this is a very good policy;

2) save other taxes (tax exemption) in your country for importing such a vehicle in KD parts instead of complete built unit, for example, to exempt the VAT for 10 years, etc.;

 

3) save shipping cost, for your information, usually, one 40feet container can load only 2 units of this "panel vans for sale" in complete built unit (CBU), however, it can load more units in KD terms calculated on average in large quantity, thus the cost is reduced down;

The above 3 points can be summarized as the following table in short, please check:

 

Comparison of the Vehicle Import (take Nigeria as an example, 15 seats hiace van)
status	tariff rate	loading units in a 40HQ	freight on per unit
CBU (complete built unit)	35%	2 units	half of the total cost for one 40HQ
SKD (semi-knocked down)	5-10%	3 units on average in quantity	one third of the cost for one 40HQ
CKD (completely knocked down)	0%	4 units on average in quantity	a quarter of the cost for one 40HQ

4) Earn your own Intangible Assets: with the vehicle assembly project, you can have, create and develop your own auto brand, logo and also exapand to the neighboring countries by using the preferencial tariff policy among your communities.

5) Creating more and more job opportunities for your local people of your country and leading your country's industry to develop and stimulate the economic growth of your country, thus you can get more good and preferential policies from your government, this is a positive circle for the development of your assembly project, you win, the government win, the people win, all win !!!

 

 

Brief introduction of our "China Big Group Company":

 

1. Our company is focusing on the the vehicle assembling project throughout the world, so far, we have successfully set up several such auto assembling plants in Syria, Ghana, Seychelles, Vanuatu for pickup, SUV, mini bus, and mini moke assembling. Anyone who is interested, contact us freely, looking forward to your cooperation.

 

2. Our main products:

 

1) Pickup (Single & Double Cabin; Gasoline & Diesel Engine; 4x2 & 4x4 drive; LHD & RHD);

 

2) SUV (off-road vehicle: 5 / 7 seats; Gasoline & Diesel Engine; 4x2 & 4x4 drive; LHD & RHD);

 

3) Van (7-8 seats, 9-15 seats, Gasoline & Diesel Engine; 4x2 drive; LHD & RHD);

 

4) Mini Moke (Gasoline & Electric, 4x2 drive, LHD & RHD);

 

5) Bus (Mini Bus, City Bus, and Long-Distance Bus)

 

6) Providing the assembling equipments of the above mentioned automobiles (pickup, SUV, Van, Moke and Bus).

 

 

 

 

1. What about After-Sales Service?

We propose and provide "REPAIR & MAINTENANCE" After-Sales Service:
1) Found a professional bus "Repair & Maintenance" service company to ensure the After-Sales Service;
2) Spare parts supply;
3) Driving & repairing training guidance;
4) Technical advisory and training;
5) Market data feedback and disposing;
6) The most important - Technology Support.

 

2. What kind of partners we are looking for?

1) Investment Power Requirement: over 0.5-1 million USD for initial investment;
2) Requirement: over 15000-20000 square meters land including 5000 square meter workshop at least;
3) Software Requirements: Good Automobile Sales Channel, Familiar with Automobile Industry and Its Business, or Ralated business line;

4) Hardware Requirements on the Import Tariff: the difference gap between auto spare part CKD (completely knocked down) and CBU (complete built unit) shall be at least 30-35%, for example, import tariff on CBU is 35%, it must be 5% or zero on CKD.

 

 

Our Company's cooperation overseas to show you, looking forward to your cooperation for mutual benefit, if you are interested, we can also give you every support on the assembling by both vehicle assembly technology and assembly equipments & SKD/CKD parts supply:

 

 

 

 

Our "One-Stop" Service as following table:

 

 

Looking forward to your cooperation!

 

Contact:  

            Lucky Peng (Ms.)

            E: yingqingpeng at china-big dot com dot cn

            Skype: chongqingbig

            Whatsapp / Viber / Wechat: 0086-15223551381