JS General Use Cement Waterproof mix for Bathroom,Balcony,roof,wall
- Category: >>>
- Supplier: Hebei Chaoda Seal Products Co. Ltd.
Share on (60256992753):
Product Overview
Description
JS General Use Cement Waterproof mix for Bathroom,Balcony,roof,wall //hbchaoda.en.alibaba.com
Our main catalogue:
1. Construction Waterproof Coating
2. Building Waterproof Membrane
3. Road Sealing Waterproof Materials
4. Telecom Power Tape(Insulation Tape, Waterproof Tape)
5. Butyl Rubber Sealing Clay
Product Description
Polymer cement based composite waterproof coating is recommended by the ministry of construction of new green waterproof coating, is two-component waterproof coating composed of organic and inorganic powder, it is a kind of new type waterproof material that have high elasticity of organic materials and good durability advantages of inorganic material. After coating it can form waterproof coating of high strength and high elastic, and can be prepared according to the requirement of color coating.
Features:
1. Construction on the surface of the base in wet or dry a variety of materials
2. The coating has high strength tenacity, water resistance, weatherability, excellent durability
3. Can add pigment, forming a color coating
4. Non-toxic, tasteless, no pollution, construction safety supervision, short construction period
5. Construction at the top of the elevation, slope and top surface does not flow
6. With the base and cement mortar and other materials solid paste
7. High temperature resistance can reach 40 degrees
Application:
All kinds of old and new buildings and structures(example:roofing of building,underground,outer wall,bathroom,tunnel and bridge pool,etc)waterproof engineering all can use.
Usage:
1.The base surface must be smooth, solid, clean, no water, no leakage, uneven place must first be leveling, the leak must first plugging treatment and Angle of Yin and Yang should make arc Angle.
2.According to the provisions of scale material, such as need to add water, first add in liquid, withthe stirrer stirring to join.Fully stir to aggregate does not contain material( stirring time more than3 minutes, preferably without manual stirring).The weight ratio of the layer coating:liquid material : powder: water = (Ⅰ)10:7:10 , (Ⅱ)10:12:10, the weight ratio of the lower, middle, and top coating: liquid material : powder: water = (Ⅰ)10:7:0-1 , (Ⅱ) 10:12:0-2, the top coating can add pigment to form color layer.Within the prescribed scope of water, slope, the top surface or facade construction without or with small amount, plane construction should add some more.
3.Select the appropriate tools (roller, brush or scraper, etc.), in accordance with the corresponding method, accordingto the bottom→ the lower→ the upper step by step to complete.
4.Protective layer or decorative layer construction, must be 2 days after the completion of the waterproof layer, in orderto facilitate the construction of plastering mortar, after the final time coatingagain of the waterproof layer, then immediately sprinkle medium-coarse clean sand coarse sand in the clean immediately. Liquid: powder=10:20-30 powder tune into puttyshape, but also can be used as adhesive, sealing material.
Technology Data:
Transportation and storage :
To prevent the sun and rain, keep the packaging intact
The liquid material should be stored in the shade place above 0 degrees ;The powder should be stored in a dry place, shelf life is 6 to 12 months
Matters need attention:
1.If paint (especially primer) have precipitation should stir to mix well at any time.
2.Try to uniform coating and cannot have local deposition, and require more rolling brush a few times to adhesive sealed and not see the bubbles between coating at the grass-roots level.
3.Each layer of coating must be in accordance with the provisions dosage of picking materials, willnot be too thick or too thin, if the thickness of waterproof layer is not enough, can add one layer or several layers, coated with totalnumber of not less than 3 layers.
4.The time interval between each layer base on once before the coating dry solid non stick (usually take three to six hours, when the low temperature, high humidity and poor ventilation, dry solidtime take longer, and otherwise shorter)
5.Construction not below 0 degrees or in the rain,and should not be in very damp and without ventilation environment construct,it will affect the film.
Our Services
Selling Points/Reasons for choosing us:
(1) Well trained and experience sales manager to help you with any of your requirement.
(2) Professional R&D team, strong technical support.
(3) We have all specifications of our products and can meet customers’ product diversity needs.
(4) We prefer to accept your lower MOQ in order to relieve your purchasing stress.
(5)Our markets are widely distributed to North Europe, East Europe, West Europe, North America, South America, East Asia, Southeast Asia, Middle East, Australia, etc. and enjoy good reputation.
Our service:
(1)You can order online from us for 24 hours, 7 days.
(2)Our experienced staff answer all your questions in professional and fluent English.
(3)OEM&ODM products and customized design are available and welcomed.
(4)Our shipping team can make sure that our customers around the world receive the hundreds of orders shipped daily from our warehouse on time and as promised.
FAQ
1.Before placing order, can we make sample firstly?
Sample can be arranged to send to you to test before placing order.
Sometimes sample is free ,sometimes sample charge should be included if more than 3 pcs with material.
But we are afraid freight charge will be paid by yourself.
Certainly, we will adjust additional sample and freight charges into your bulk order.
2.How can I get your sample?
Of course, we can send you some samples. Most samples are free, but sometimes we will take small sample fees.
Maybe you also send us your DHL or EMS/UPS/TNT etc account ,so you can pay for air freight to your carrier company directly.
3.Whether we can print our logo or need our color or size or not?
Yes, because we have our own factory and R&D team, so we can make products as your demands.
We can print your logo, we also can make as your size and print it as your color.
4.How many kinds of payment terms you can accept?
About payment terms, we would like 100%TT if less than $1000.00
Usually for bulk order , would like can be paid pay 30%- 50% advanced payment and the rest should be paid before dispatch.
We hope this information will be helpful to you, if you have any question, please feel free to contact us, we are always at your service.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
