Share on (60277015226):
manufacturers price solar panel in china (SKI-SF)

Flat plate Solar Water Heater is one of common Solar Water Heater for solar water-heating
system in homes and solar space heating.Flat plate Solar Water Heater provide quality hot
water with its new solar energy efficient flat plate design.This glazed collector includes a
selective coating to maximize the solar heat absorption ,weather resistant aluminium framing and
interior fibreglass insulation for increased efficiency.
What's the specification of our portable solar home system?
MODEL | Split pressurized solar heating system with double heat exchanger | ||
| inner tank | titaium steel 2mm and enamel coating 0.5mm with double heat exchanger | Frame and Frame angle | aluminum alloy,thickness:2.5mm 0-45° |
| outer tank | colored steel sheet,thickness:0.4mm | Lowest working temperature- | 40℃ |
| Flat border | Aluminium alloy | Working pressure | 7bar/0.7MPa |
| Flat type | Blue Tinox or Black chrome | Permissible wind | 30m/s |
| Flat size | 2000*1000*80 | Needed accessories | copper connector,copper connector(male&female),tee fitting,air vent valve,working station,T/P valve,expansion tank,circulating |
| Header pipe material | copper | Hail resistance | 20mm |
What's the working principle of our portable solar home system?
1. The flat plate absorbs solar energy and transmits it to the water tank through circulation .
2. When the temperature of the flat plate reaches the set value, the controller starts the circulation pump automatically.
3. The circulation pump makes heat-conducting liquid circulate automatically.
4. The heat-conducting liquid transfers heat to water by lower heat exchanger in the water tank.
5. When the temperature difference between solar flat plate and tank doesn't reach the set value, the
circulation pump will be shut automatically .
6. In case the temperature of the water tank does not reach Tmax, Electric Heating Element will start to work automatically.


Collector:
Material | Tempered textured glass |
Cover thickness | 4mm |
Cover transmission | 87% |
Ext.Dimension | 2000*1000*80 |
Aperture area | 2 m² |
Material | copper |
Surface coating | Black chromed/blue sputtered |
Construction type | Fin&tube(ultrasonic welding) |
Header material | Copper T2 |
Header tube size(L*W*T) | 1886mm*Φ10mm*0.458pcs |
Absorptivity | α=0.93(±0.05) |
Emittance | ξ=0.12(±0.02) |
insulation material | Fiber glass Insulation(blacking backing) |
insulation thickness | Back 25mm |
Conductivity(w/mk) | ≤0.048w/m.k under test temperature 70°C |
Bracket/Frame | Aluminum alloy |
Back plate | Galvanized steel plate 0.3mm |
Max operation temperature | 200°C |
Max pressure | 1400kpa |
sealing gasket | EPDM |
Max. working temperature | 120°C |
Max. working pressure | 10bar |
Daily output volume | 105˜300L |
Water Tank:
Capacity(L) | 100L-500L |
Material of inner tank | BTC 340R steel & enamel coating |
Material of outer tank | Colorful steel |
Tank insulating layer | 50mm high-density polyurethane foamed |
Foam density | 45kg/m3 minimum |
Heat preservation | 96 hours |
Tank connections | water Inlet /water outlet for integrating the heating circuit |
Sensor | electric heating and temperature sensor |
Tank welding | Argon arc welding |
Heat pipe vacuum tube Solar Collector Quantity | 15 pcs to 60pcs |
Material of coil | Copper coil |
Accessories Display

Customers feedback
Comparisions
Comparing with Compact non-pressure flat plate solar water heater:
1. Anti-freezing liquid for in-direct solar water heating, more safe, fast, anti-freezing;
2. No tank drainage even though flat plate is broken;
3. High pressure tank with direct city water supply and high pressure hot water outflow;
4. Multifunction tank for bathing, washing, domestic heating, pool heating, etc.
5. Less heat loss with safety valve closed storage tank;
Shipping
2.We are a factory manufacturing solar water heaters,best production capability ,best quality control, Best Service .
3.Inspected by the Inspection Institution of Technischer überwachüngs Verein Certification.
4.100% QC inspection Before Shippment.
5. CE/ISO/EN 12975 listed,competitve price.
Company View



Certificates


Q1:Can I add my logo on the solar water heater?
A:Yes,OEM and ODM are available for us.
But you should send us the Trademark authorization letter.
Q2:How can i get the after-service?
A:We will send you the spare parts by free if the problems caused by us.
If it is the men-made problems,we also send the spare parts,but you should pay.
For our solar water heater it is lifelong maintenance.
Q3 :Do you have inspection procedures for solar water heater?
A:100% self-inspection before packing.
Q4:Can I have a visit to your factory before the order?
A:Sure,welcome to visit our factory.
Here is our factory address:Niutang Industrial Park, Wujin District, Changzhou, Jiangsu, China.
Hotel booking service is available.
New products from manufacturers at wholesale prices