1) Artificial lawn can be used in all climates. It will not be influenced by rain and snow. It can be used in low and high temperature and tableland areas
2) It is similar to natural lawn, with easy drainage. It needs 20 minutes in draining water after heavy rain
3) Except having many natural lawn merits, artificial lawn is abrasion resistant. PU racetrack of artificial lawn court can use 5mm max. spiked shoes.
4) Color fastness, low maintenance; can be installed above pitch, cement, and hard sand surface. Popular in long-time training, it can be used frequently for primary and high school playgrounds.
5) High density suitable for golf and tennis field.
6) Easy to shape and install, have good drainage system
7) Abrasion resistant, water permeable, quick dry, non-slip
8) No need watering and mowing
Type
XMV8000H1VY+3200D
Color
4 colors
Material
PE+PP
Pile height
40MM
Stitch rate
160stitches/m
Gauge
3/8 inch
Density
16800stitches/m2
Backing
CPP+Leno
Coating
Latex
Roll length
As required
Roll width
Up to 5m
Infill Requirements
NO
Warranty
8-10years
Delivery time
7-15days
Landscaping artificial grass for wedding decoration :
Packaging & Shipping
Company Information
Advantages:
FIFA 2 Star Field Certification
FIFA 1 Star Field Certification
FIH (Federation International Hockey) product certification
ISO9001 International Quality Management System certificate
ISO14001 International Environmental Management System certificate
International PONY Test Report
TSI Test Report
Labsports Test Report
ISA Test Report
Installation:
Prepare and test the base ground:Inspect the foundation to ensure it has a flat and smooth surface and appropriate slopes, making sure the foundation is qualified for installing Artifical Turf.
Measuring line:Locate the centers of the ground and the two semicircles, and according to these three centers locate the intersecting point of half-way lines and touchlines, and then determine the positions of functional lines and spot by using Pythagorean proposition.
Palletising turf roll:According to drawing, position the turf rolls on the exact places along the touchline.
Cutting the edge:Cut white turf piece into strips(width to be as per actual need) for white functional lines(half-way lines, base lines etc.), and put them aside preparing for installation.
Cutting white line:Measure and re-position the white line on the turf that has been all well joined on the ground. Cut the turf out and place the seam tape beneath the cuts.
Infill rubber granules:After sand infilling, Place the rubber granules piles on the lawn on different spots evenly at a distance of 4m from each other, then spread them evenly on the lawn(the quantity of sand depends on the pile height of the turf). Afterwards, use the combing machine to sweep the sand into the fibers and to comb up the fibers. Do this process once longitudinally and transversely.
Brushing: to brush the grass in the vertical and horizontal one time by the grass-brushing machine
Check and Acceptance:Inspect the entire finished lawn as per concerned standards and requirement. If any defects found, correct it.
