Hot Selling Portable Hanging Electric Crane Scale
- Category: >>>
- Supplier: Chongqing Shanyan Crane Machinery Co. Ltd.
Share on (60382055064):
Product Overview
Description
Product Description
Hot Selling Portable Hanging Electric Crane Scale
Crane Scale
Introduction
Application
This type of scale can be widely used in manufacturing, fabric producing, chemical and medicine engineering, keeping grain and good in the storehouse, buying and selling of farming product. It is really a satisfying scale for modern management and high productiong efficiency.
The system is based on micro-signal communication technology, and it is 100% quality for Electronic Products Supervision&Inspection institute regulation.
Technical parameters
Weighing accuracy | Comply with OIML Ⅲ | ||
| Operation time | 60hours | ||
| Safe over-load | 150%F.S | ||
| Damaging over-load | 300%F.S | ||
| Working temperature rangle | 10~50℃ | ||
| Operation humidity | <95%R.H | ||
| Dimension of display | 5 digit 30mm(1.2")LED | ||
| Stability time of reading | <5.0S | ||
| Controlling distance | 10~15m | ||
| Details | Weight kg | ||||||
| Capacity t | Division kg | Length | Ring Radian | Ring width | lifting hook | C5 | C7 |
| 1 | 1 | 505 | 95 | 58 | 35 | 11.5 | 11.8 |
| 2 | 1 | 505 | 95 | 58 | 35 | 11.5 | 11.8 |
| 3 | 1 | 505 | 95 | 58 | 35 | 11.5 | 11.8 |
| 5 | 2 | 610 | 120 | 80 | 45 | 16.4 | 16.7 |
| 10 | 5 | 650 | 125 | 90 | 45 | 21 | 21.3 |
| 15 | 5 | 940 | 135 | 98 | 55 | 45.5 | 45.8 |
| 20 | 10 | 1100 | 235 | 127 | 70 | 73.5 | 79.8 |
| 30 | 10 | 1290 | 335 | 145 | 90 | 98 | 98.5 |
Product show
European Design
1. Foot mounted 2.Double-beam
3.Single Beam Low Headroom 4.Single Beam Standard Headroom
Our Services
Chongqing Shanyan Crane Machinery CO.,LTD Service
All the machines will be full tested before shipment
Technical supports and suggestions before you order a machine according to your work place.
Professional opertion instruction of the machine.
12 months warranty period and we will provide the consumable parts at cost price after the warranty period.
24-hour technical support by emails, calling or videos.
FAQ
•Should lifting warning devices be part of a'Thorough Examination'?
Yes. Devices fitted to machines, such as cranes, which cut-out hoisting, derricking or trolleying motions, eg when the SWL is exceeded, should be regarded as part of the lifting equipment and be included in the thorough examination. This applies also to any radius/load indicator fitted to lifting equipment.
•Are pallets,skips,ladles or similar considered to be lifting equipment?
•Usually no. Where this equipment is used for carrying material loads and are not permanently attached to the lifting machinery it would normally be considered to be part of the load and a 'Thorough Examination' is not required. The equipment should be maintained and inspected to make sure it can be used safely including when it is being lifted.
•How often should lifting equipment be subject to thorough examination?
Thorough examination of lifting equipment must take place every 12 months - or every 6 months if the equipment is used to lift people. Any accessories used in lifting should also be inspected every 6 months. These are the minimum requirements, where there is no formal 'examination scheme' drawn up by a competent person.
Company Information
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
