Polymer Modified Mortar For Styrofoam Coating

Product Overview

Description

Polymer Modified Mortar For Styrofoam Coating

Introduction :

This product is imported flexible polymer powder as the main additive , with high-quality materials and fine inorganic cementitious aggregate refining. Has excellent adhesion, breathability and crack resistance, and has some additional water features. This product is non-toxic, tasteless green products . Widely used in the insulation system on the base of thin plaster EPS polystyrene board , GRC board, pottery sticky boards and cement boards , etc., can be used with alkali-resistant glass fiber mesh used.

Application :
A:Suitable for inside and external plastering construction of aerated concrete blocks, sand-lime brick, ceramic tiles and other types of strong absorbent wall materials .
B:Suitable for inside and external plastering construction of clay brick, concrete hollow blocks , red wall tiles and other machines .
C:Reinforced concrete shear walls , plastering construction beams, columns, plates .
D:As surface mortar used in the EPS board , XPS insulation board , insulation mortar and other insulation material surface paving fiberglass mesh or steel mesh and leveling layer of primer .
E:This product is mainly used for commercial residential and industrial building's exterior wall or the insulation level of EPS / XPS insulation level special plaster cracking mortar .

Feature:

A:Wipe the surface layer does not bear the load .

B:Wipe the surface layer and the base layer have sufficient bond strength to make it in the construction or long-term environmental effects and no weight loss, no cracking .

C:Wipe the surface layer is thin and layered painting , the surface layer should be smooth , clean, beautiful and meticulous Lee .

D:Dry environment used for a large area exposed to the air .

 

Technical Date:

 

Test Program		Performance indicators
Tensile bond strength Mpa ( with cement mortar )	Normal condition	≥0.70
	temperature resistance	≥0.05
	Water resistant	≥0.05
	Freeze-thaw resistance	≥0.05
Tensile bond strength Mpa (with 181kg/m2 polystyrene board )	Normal condition	≥ 0.10 and the destruction of polystyrene board
	Water resistant	≥ 0.10 and the destruction of polystyrene board
	Freeze-thaw resistance	≥ 0.10 and the destruction of polystyrene board
Operating time,h		1.5-4.0
Anti- crack		Thickness of 5mm or less free of cracks
Flexibility compressive / flexural strength		≤3.0

 

Picturer: