Wheelsky 1ozx4 4oz Low Profile Curved Steel Fe Adhesive Wheel Balance Weights
- Category: >>>
- Supplier: Ningbo Hi-Tech Zone Tongcheng Auto Parts Co. Ltd.
Share on (60419864697):
Product Overview
Description
Steel adhesive wheel weights for north american market
Salt-spray tested to resist corrosion for 48-72 hours
Apply to Passenger Car & Light Trucks
Available With Blue Tape, White Tape & And Yellow Tape With Easy-tear Paper
Material:Fe(Steel),Lead-free alternative
Salt-spray tested to resist corrosion for 48-72 hours
Apply to Passenger Car & Light Trucks
Available With Blue Tape, White Tape & And Yellow Tape With Easy-tear Paper
Item | Weight | Size | Package | Surface |
FA-14 | 1oz x4 (4oz) | Thickness 7.0mm with tape & width 19mm | 36 strips(144oz)per box | Zinc plated only |
FA-14A | 1oz x4 (4oz) | Thickness 7.0mm with tape & width 19mm | 36 strips(144oz)per box | Zinc plated and powder coated |
FA-14C | 1oz x4 (4oz) | Thickness 7.0mm with tape & width 19mm | 36 strips(144oz)per box | Zinc plated and black powder coated |
FA-14D | 1oz x4 (4oz) | Thickness 7.0mm with tape & width 19mm | 36 strips(144oz)per box | Dacromet coated |
FA-14F | 1oz x4 (4oz) | Thickness 7.0mm with tape & width 19mm | 36 strips(144oz)per box | Zinc plated only |
FA-14FA | 1oz x4 (4oz) | Thickness 7.0mm with tape & width 19mm | 36 strips(144oz)per box | Zinc plated and powder coated |
FA-14FC | 1oz x4 (4oz) | Thickness 7.0mm with tape & width 19mm | 36 strips(144oz)per box | Zinc plated and black powder coated |
FA-14FD | 1oz x4 (4oz) | Thickness 7.0mm with tape & width 19mm | 36 strips(144oz)per box | Dacromet coated |
FA-16 | 1oz x4 (4oz) | Thickness 6.0mm with tape & width 19mm | 36 strips(144oz)per box | Zinc plated only |
FA-16A | 1oz x4 (4oz) | Thickness 6.0mm with tape & width 19mm | 36 strips(144oz)per box | Zinc plated and powder coated |
FA-16C | 1oz x4 (4oz) | Thickness 6.0mm with tape & width 19mm | 36 strips(144oz)per box | Zinc plated and black powder coated |
FA-16D | 1oz x4 (4oz) | Thickness 6.0mm with tape & width 19mm | 36 strips(144oz)per box | Dacromet coated |
Adhesive wheel weight installation instructions
1. Pre-treat the rim
Apply a suitable cleaning agent on the area where weight is to be applied. Wipe the area clean and dry.
Please note: be sure to test the cleaning agent on a small area to ensure it will not damage the wheel's finish.
2. Select adhesive weight size
Adjust the adhesive weight to the rim radius. The radius of the weight body must run at least parallel to the rim
radius. It is even better if the radius of the weight is smaller than the rim radius. Cut the correct amount of
adhesive weight needed.
3. Apply the weight
Remove the tape backing and press the center of the weight exactly at the imbalance point.
Please note: Do not touch the tape surface after peeling off the tape backing.
4. Secure the weight
Once the center of the weight is located at the imbalance point, press down the weight to the rim from the
middle towards the outer edges. Firm hand pressure should be enough to secure the weight.
Apply a suitable cleaning agent on the area where weight is to be applied. Wipe the area clean and dry.
Please note: be sure to test the cleaning agent on a small area to ensure it will not damage the wheel's finish.
2. Select adhesive weight size
Adjust the adhesive weight to the rim radius. The radius of the weight body must run at least parallel to the rim
radius. It is even better if the radius of the weight is smaller than the rim radius. Cut the correct amount of
adhesive weight needed.
3. Apply the weight
Remove the tape backing and press the center of the weight exactly at the imbalance point.
Please note: Do not touch the tape surface after peeling off the tape backing.
4. Secure the weight
Once the center of the weight is located at the imbalance point, press down the weight to the rim from the
middle towards the outer edges. Firm hand pressure should be enough to secure the weight.
Q1: How long can I get the feedback after I send the inquiry?
A: Within 24 hours.
Q2: What's your MOQ?
A: Different products have different MOQ, just tell us how many you want.
Q3: What is your sample policy?
A: We are willing to supply samples at all your needs.
Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q5: What is your way of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you need branded package, we can pack as your request.
Q6: What's your delivery time?
A: 30-45 days according to the order quantity.
Q7: Do you test all your goods before delivery?
A: Yes, we have quality control all through our production and have final inspection by QC with AQL standard before shipment.
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
