Bentonite rheological additive with cheap price
- Category: >>>
- Supplier: Zhejiang Yuhong New Materials Co. Ltd.
Share on (60437818406):
Product Overview
Description
Product Description
YH SERIES INORGANIC BENTONITE QUALITY STANDARY TRAGET:
Item | Appearance | Whiteness | PH value | Surface viscosity(c.ps) | Heavy metal(PPM) | Montmorillonite content(%)≥ | ||
| Pb | As | Hg | ||||||
| YH-A | Gray Powder | >65 | 6.5-10.5 | 0 | <10 | <0.3 | <0.2 | 65 |
| YH-B | Gray Powder | >65 | 6.5-10.5 | 50 | 70 | |||
| YH-C | Gray Powder | >65 | 6.5-10.5 | 150 | 75 | |||
| YH-D | Gray Powder | >65 | 6.5-10.5 | >250 | 80 | |||
| YH-ED | Gray Powder | >70 | 6.5-10.5 | >300 | 85 | |||
| YH-EV | Gray Powder | >75 | 6.5-10.5 | >500 | 85 | |||
| YH-EW-2 | Gray Powder | >75 | 6.5-10.5 | >800 | 85 | |||
| YH-lithium based | Gray Powder | >75 | 6.5-10.5 | >100 | 85 | |||
| Rubber separation bentonite | Gray Powder | >65 | 6.5-10.5 | >100 | 80 | |||
| Paper-making bentonite | Gray Powder | >75 | 6.5-10.5 | >10 | 75 | |||
| Bentonite for Diatom ooze | Gray Powder | >65 | 6.5-10.5 | >150 | 75 | |||
Attention:Recommended viscosity test method :at the temperature of 25°C,make a pre-gel(the amount of bentonite is 5% of the total system)stand it for 60minutes,test the viscosity with a Brookfield DVll viscometer with the rotor #6,100r/min.
Main chemical ingredients(%)
| SiO2 | Al2O3 | MgO | TiO2 | Fe2O3 | CaO | K2O | Na2O |
| 60-62 | 19-20 | 3.89-4.40 | <0.01 | 1.0-1.5 | 2.0-3.0 | 0.25-0.35 | 0.1-0.2 |
Use method
(1)pre-gel method:
The YH series bentonite(inorganic gel) rheological additive could be usd as pre-gel:the preparation of a pre-gel concentration should be according to the desired viscosity level of the stirring speed and the product of the dispersing device in order to obtain the best results.Generally speaking,2-10%(mass percentage of the whole system)/Weigh a certain amount of the product under stirring slowly added to water of 25-30°c note aviod caking.After the addition,adjust the speed to 1000-1200RPM,and disperse it by stirring for 30 minutes,so that products can sufficiently disperse into the water and form a unform gel,stand it for 8-24 hours,and use it after the colloidal plays stabilized thckening effect.
(2)Dry powder method
YH series bentonite rheological additives(inorganic gel)can be directly put into required system and dry powder.Formulated cincentration of the system should be decided according to the needs of the various indicators of the stirring speed and the dispersing device(viscosity level,thixotropy,ect.)
Attention
(1)YH series inorganic gel will take effect under the condition of dispersing enough.It will increase the function of thickening,anti settling,thixortopy of the gel is proper stored Surface activator,diatomic alcohol will disturb the hydration,it should be added after YH Series dispersed enough.
(2)YH series inorganic gel can be used alone or mixing with thickening agent such as carboxymethyl cellulose,hydroxy ethyl cell ulose,CMHPC,which will acquire best rheological property.It has been found that this kind of pruduct should avoid mixing with the polyurethane thickening agent.
Company Information
Company introduction
Anji Yuhong Clay Chemical Co.,Ltd.is located in famous capital of bentonite:Anji County.It near NO.318 National Highway Si'an road,besideNO.04 Provincial Highway.
Anji Yuhong Clay Chemical Co.,Ltd.is a private enterprise which is famous for manufacturing bentonite,founded in 2000.At present,the company mainly manages YH series of bentonite,and has passed IS9001 international quality certification system,with complete quality assurance system.At the same time,we established "Zhejiang Bentonite R&D Center"with Zhejiang University of Technology and our pruduct was awarded as the provincial high-tech industry product.
We owned 40 million tons storage bentonite clay hill and covered 168 units area.Nowadays,we owned total assets over 50 million,108 workers including over 20 tech skilled talent. Our company has been followed by First Branch factory and Research Center.
Now we have perdected quality control system,there are 3 production line of automatic and semiautomatic.We output 20000tons bentonites clay of YH series .Our products are awarded "Zhejiang Good Quality Products"many times.
Followed policy for "credit oriented,quality and honor first".We sincerely welcome customers from both home and abroad to come here and negotiate."Yuhong "wish to be your most reliant friends..
Looking around our company
Base of mine
The equipment of activation Water disposal system
Raw material Incasement
The power of science research
Autocontrol system Auto-drying system
Filtration system Inspection of product
Inspection of product Inspection of product
The honor of our company
FAQ
Q:Are you a trading company or manufacturer?
A: Manufacturer with factory, but we also do our trade business.
Q:How get the samples?
A:We can offer less than 1kg free samples for your testing, but air charge is yours.
Q:Is Customized Material available?
A:Yes,of course. Please offer your required specs
Q:How about the Packing?
A:Standard export packaging, according to customer's request.
Q:Where is loading port?
A:Shanghai port
Thanks for your reading!
Anything unclear,please contact with us,we can talk details.
Tel:86-572-5800000
Website: www.chinabentonite.com
We Recommend
New Arrivals
New products from manufacturers at wholesale prices
