thermoplastic powder coating with Dipping work process 2016

Product Overview

Description

JINTIAN is committed to the manufacture and supply of a wide range of PE thermoplastic coating powders and the service is backed by the experience of over 20 years of powder coating application. Thermoplastic PE powder use polyethylene as the basic material, modified by various functional additives, and colored by different pigments according to the final needs, could easily applied with fluid bed dipping technique, the cured membrane it forms on the surface of metal works has excellent flexibility and impact strength, simutaneously provides outstanding resistance to chemical, aging, and weather, along with a decorative finish, a good grip and warm feel.

 

JINTIAN domestic(TQ10) series PE coating powders provide unrivalled attractive decorative finish with very good grip and warm feel. The finished coating is super-gloss and smooth. Typically applied in the coating of bicycle baskets, scooter baskets, haners, shelves, pet cages, display racks, planter baskets etc.

 

JINTIAN engineering(TQ20) series PE coating powders form a bonded coating that is extra tough, with strong adhesion to the metal substrate, excellent weather and chemical resistance, great resistance to wear and tear. Commemly used in public area that require superior durability and resistance to UV rays, sun and sea exposure, weather and chipping like highway fences, fence posts, street and garden funiture etc.

 

JINTIAN also offers a(TQ30) series of PE coaing powders that are made of quality virgin material. These powders contain no halogens, heavy metals and bisphenol A so on, enable the finished coating articles to contant with foods, pharmaceuticals and potable water without any contamination. Mainly used in refrigerator shelves, kitcher racks, dish drainer baskets etc.

 

Technical data sheet

Item	property
appearance	Uniform color powder,no agglomeration
Density(g/cm3)	0.979-1.009
MFI(g/10min)	15-45
Melting point(°C)	120
Particle size(mesh)	60meshes
Non-volatile matter(%)	≥99.5

 

Recommended operation conditions 

Before all, the rust and oil contamination on the surface of the work piece must be removed and make it clean and smooth. Metal preheat at 220°C - 320°C for 5 mins(depending on the metal thickness). Dip it into the fluid bed for 3 - 5 seconds, a post-heat cycle at 170 - 200°C,5-10 mins is necessary to develop fully the surface finish.