XLB 500*500*2 Rubber Vulcanizing Press Rubber Machine/Rubber raw material machinery

Following is the main processes:

1.conching: Put the rubber granulates and stain into the stirring barrel to stir, and then put into the adhesive to stir.this process requires for 4-                                                         6 minutes ( because the adhesive is easy to cure, so stir it when use ).

2. Weighing raw materials: weight the rubber granulates stirred, according to the granulates' thickness  requirement of the tiles .

3. Paving and pressing: Paving the rubber granulates weighted on the mold, then floated it by trowel. Firstly paving the surface rubber granulates which is fine and color, then the thickness and black.

4. Vulcanization molding: Covering anti adhesion cloth, pushing the mold into vulcanizer to vulcanize, the time of vulcanization accord to the thickness of the rubber tiles, in general, 3-8inutes finished. After that, Mold separate automatic, then remove floor tile on the shelves to dry.

Technical Parameters Of Rubber Floor Press Machine:

rubber vulcanizing press   Main Technical Parameters

Rubber floor vulcanizer machine

This machine is a special vulcanizing machine, rubber floor tile production each layer configuration two sets of mould, sulfide in turn, can effectively improve production efficiency.Manual push-pull mode device at the same time, the operation more convenient.
Company can manufacture according to the requirements of various non-standard types of rubber floor tile molding equipment.