veterinary Feline Immunodeficiency and Feline Leukemia combined rapid test

Principles

The test device is an immunochromatographic assay for the qualitative detection of CAV Ag and CDV 
Ag  in  canine  respiratory  tract  secretions.  The  test  device  has  a  letter  of  “T”  and  “C”  as  test  line  and 
control line on the surface of   the card. Both the test line and control line in result window are not visible 
before applying any samples. The control line should be always appear if the test procedure is performed 
properly and the test reagents of control line are working. A purple test line will be visible in the result 
window  if there are enough  Antigen  in the specimen. The specially  selected  monoclonal antibodies are 
used in test band as both capture and detector materials. These enable the device to identify CAV Ag and 
CDV  Ag in canine with a high degree of accuracy.

Characteristics

1) One-step rapid test of CAV Ag and CDV Ag 
2) Rapid test results between 5 ~ 10 minutes
3) Expensive equipment not required
4) Easy storage and maintenance
5) High-purity and high-quality materials of the test kit increase its sensitivity and specificity.
Materials (10 tests/kit)
1)  Test -----------------------------------------------------------------------------------------------------    10 units
2)  Diluent (buffer) ----------------------------------------------------------------------------    0.4 x 10 units
3)  Disposable dropper   ---------------------------------------------------------------------------------  10 units
4)  Swabs for sample collection -------------------------------------------------------------------------  10 units
Composition
Specimen well (S: for dropping), Test line (T), and Control line (C) are marked on the device. Inside  of
it,  the  strip  is  composed  of  sample  pad,  conjugate  pad,  nitrocellulose  membrane  (test  paper),  and 
absorbent pad
Effect
Simultaneous detection of CAV Ag and CDV Ag in Canine ocular discharge or nasal discharge
Uses
1)  Specimen
Canine ocular discharge or nasal discharge
2)  Test procedure
a)  Collect  canine  ocular  or  nasal  discharge  with  a  swab  and  put  the  swab  into  a  sample  tube 
containing 0.4 of buffer.
b) Swirl the buffer with the swab.
c) Drop 4 drops (100  ) into the specimen well.
d) Read the test results within 5 – 10 minutes.
 Invalid result after 10 minutes.
3)  Interpretation of the results
A  purple  band  should  appear  on  the  control  line  regardless  of  the  test  result.  The  presence  of 
another band on the test line determines the result.
Control  Line  (C):  The  line  should  always  appear.  If  this  line  does  not  appear, the  test  should  be 
considered  invalid.  This  is  might  be  because  of  impure  buffer  or  the  lack  of 
specimen. It should be tested again with another kit.
Test Line (T): The presence of CAV  Ag / CDV Ag determines the test line.
(1) CA V Negative / CDV Negative
(2) CAV Positive / CDV Negative
(3) CAV Negative / CDV Positive

(4) CAV Positive / CDV Positive
4) Retesting
a)  Both Test and Control lines do not appear.
b)  Test line only appears.
.
Further examinations

This  test  is  for  primary  screening  only .  Co nsult  veterinarians  for  further  necessary  examinations  to 
obtain clinical test results.
Precautions
1) Use for canine in-vitro diagnostic purposes only. 
2) Use within 10 minutes after opening the pouch because the test kit is very sensitive to moisture and its 
effect may diminish.    
3) Be careful of not touching the result window.
4) Every specimen should be used with different dropper.
5) For testing, buffer included only should be used.
6) Do not use specimen showing hemolysis or being contaminated with microbes, which may cause false
positive or false  negative result.
7) Deal with specimen carefully. They can deliver unknown virus or infectious bacteria.
8) Use disposable gloves when you suspect the infection caused by specimen. And wash your hands later.  
9) Dispose solid wastes after sterilizing them at 121 °C for over 1 hour.
10) Do not use the kit when its pouch is torn, sealing is not good shape or expiration date is passed.

 1. Any inquiries will be replied within 24 hours

2. Professional manufacture. 

3. OEM/ODM are available

1) Customized design foil bag and Customized design box 

2) White foil bag and white box and print lable in box 

3) Uncut sheet is available

4) Handle label is available

5) Any your idea on rapid test we can help you to design and put it into production

4. High quality. reasonable and competitive price,fast lead time

5.After-sale service

1)All products will have been strictly Quality checked in house before packing

2)All products will be well packed before shipping

3)All our products have 18 month expiration date. 

6.Faster delivery

sample order in stock,and 3~15 days for bulk production

7. Payment: You can pay for the order via: T/T Western Union

8.Shipping: We have strong cooperation with DHL,Fedex,TNT,EMS,China Air port