High Elastic Liquid Acrylic Water Resistant Paint for Concrete Roof Surface

1)Substrate treating

The substrate should be firm, smooth, clean, dry, dust-free and oil-free.  Uneven places or cracks should be filled by sealant or plgging agent.

2) Coating preparing

Mix the powder material with the liquid material proportionately (The ratio of power material to liquid material is 25:17 by weight), then fully stir for 3-5 minutes until it become uniform jelly staff with no obvious particles and sediments. It would be quite appreciated if the mixture could be laid aside for a while before stirring.

3) First coating

Brushing on the substrate directly and completely. 2-3 coatings in total are preferred according to real application condition. Brush repeatedly to ventilate the gas if any bubble is formed when brushing. The thickness of each coating should be 0.5mm

4) Second or third coating

Re-coating should be applied only after the surface dry of the first coating ( touch dry , it will take 1-2 hrs at normal temperature of 25-30℃), the direction of brushing should be vertical to the previous coating. Moisturize the previous coat by spraying mist on it if it is solidified before second coating.

5.Application Notice

1. Avoid to apply the coating when rain or temperate is below 5℃.

2. Keep the substrate dry and smooth.

3. Water dillution is not necessary. It depends on thickness of the coating.

4. Keep the remain coating sealed and dry.

5. Speed up the dryness by ventilation equipment in a humid and airless place.

6. It is proposed to do a trial before large application because of individual difference in environment and selection of construction materials so as to ensure the best waterproofing and protection effect.

6.Package and Delivery

 7.Factory