Алмазная нано керамическая краска 9H для автомобиля «KubeBond», доступна OEM

Product Overview

Description

 

“9H-Wafer-K300" is the latest technology from EZ Coating LLC which is a 9H glass coating with the 3D matrix structure. “9H-Wafer-K300"is clear and transparent like water when it is in the container and it will turn to a rigid film like glass to protect the substrate permanently. By using the 3D matrix technology, ”9H-Wafer-K300" glass coating can offer excellent scratch resistance and long longevity. ”9H-Wafer-K300" creates a very good barrier by chemically binding to the substrate, which provides an easy-to-clean ability to avoid the water, dirt, grease and other stains. The protected material can be cleaned numerous times without reapplication. ”9H-Wafer-K300" is resistant to solvents, acids, bases and chemicals; it is applied as one component coating and no mixing with another material is required. Tack-Free within 2 hours at room temperature and full curing can be done after 8 Hours.

 

 

1.Nanotechnology-based transparent thermal insulation coating for glass and polycarbonate surfaces

2.Blocks up to 100% of UV Rays

3.Blocks up to 90% of Infrared Rays

4.Maintains up to 90% visible light transmission

5.Reduces seasonal heating/cooling costs

6.Cost effective & environmentally friendly

7.Easy application by custom paint roller

8.Fully cures in 8 Hours

9.Low VOC

 

			Permanent	Semi-Permanent
			Solvent Base	Solvent Base
Natural Cure	Surface Dry		25°C,1-2hours	25°C, 8hours
	Full Dry		25°C,3-5hours	25°C,3-5hours
Thermal Cure (OVEN)			130°C,30 minutes	130°C,30 minutes
			200°C,10 minutes	200°C,10 minutes
Application		Wiping	X	V
		Brushing	V	V
		Dipping	V (Clean Room Required)	V (Clean Room Required)
		Spraying	V (Clean Room Required)	V (Clean Room Required)
Pencil Hardness			UP to 9H	Below to 9H
Thickness of coating			UP to 30 micron	UP to 20 Micron
Viscosity (#2 Zahn Cup, Cup Measurement)			14 seconds	10 Seconds
Applicator Materials			*Metal *Wood/Stone/Ceramic *Plastic/Rubber *Glass *Leather/Fabric/Textile *NON-Absorbent Leather	*Metal *Wood/Stone/Ceramic *Plastic/Rubber *Glass *Leather/Fabric/Textile *NON-Absorbent Leather
Standard Consumption By Spraying on non-porous surface			900 cm2/ml	900 cm2/ml